Micro Optical Switch
This kind of optical micro switchis driven by a relay to control the prism to turn, thus switch the path, with only few channels such as １ｘ１,１ｘ2, and２ｘ２. It is normally used for OLP (Optical Fiber Line Protection) system. This mini switch can be seen as an updated version of the regular mechanical optical switch in terms of the size of the case. Therefore, compared with the normal mechanical switches, it is more integratable.
Micro Optical SwitchFeature
1x1, 1x2, 2x2 Bypass
Latching and Non-latching
IL: 0.7dB
Switching speed: 4ms
Epoxy-free on the optical path
High isolation
Compact design
How It Works
Mini Mechanical Optical Switchis of the same structure of the normal mechanical optical switch, realized by using mechanical devices to move mirror or prism physically, thus to redirect optical signals to the desired output port. Whereas, mini type is more compact and easier to be integrated into customer's system.
MEISUhas developed 1D and 2D optical fiber array and collimator array for various optical selective switches. All the arrays of MEISU's WSS wavelength selective switch can be customized according to customers' requirements.
Send product request
Other supplier products
 |
2D Optical Fiber Collimator Array | Traditional optical fiber collimator is the basic component of optical fiber communication device. However, with the development trend of integrati... |
 |
Linear Fiber Array | One dimensional linear fiber array is made by placing M / MM / PM fibers on a V-grooved substrate at specified spacing ( pitch ). As for these V gr... |
 |
Mini PM Coupler (50:50) | Designed with a compact packing case that is specifically suitable for Fiber optic gyro (FOG), this mini polarization maintaining (PM) coupler can ... |
 |
Mini PM Coupler (5:95) | Designed and produced by MEISU, this mini pm fiber couplercan split the input power stably in the splitting ratio of 5:95. And similar to the other... |
 |
HT (1000℃) High Temperature Fiber Optic Collimator & Focuser | High temperature (1000℃) Fiber Optic Collimator & Focuser normally consists of a HT fiber such as gold-coated fiber, HT epoxy and optical lens.... |
