Steel Belt Drum System
There are drums on the tight end and drive end for each,Website:, whose diameter is 1000mm. Both sides of the drum use material Q235, with orange anti-rust paint. The material of drum's surface is AISI304. Having been polished, the drums will not damage the surface of the steel belt. The drum is balanced in static state. On the surface, there is geometry radian, which prevents steel belt from going off center. Drum's bearing block adopts rolling-motion rail. It has automatic compensation equipments and manual error-correction equipments, which are used for preventing spring loaded steel belt from going off center. The drum adopts gear hollow shaft and direct-connection bearing unit.
Other supplier products
|
Steel Belt |
Granulator for steel belt and the difference between non-exclusive steel beltSHANGHAI REBO GRANULATOR company limited based on the principle of res... |
|
Drop Former Rotating Shell |
The rotating shell is a very thin sleeve. There are many small sharp nozzle holes on its outside surface,Website:, which are arranged in certain fo... |
|
Release Agent |
REBO Granulator Agent (RB-4)The RB-4 Agent is a kind of emulsion containing surfactant,Website:, the product can effectively prevent the adhesion o... |
|
Release Agent Tank |
Function characteristic: Because the product has the high cementation performance,Website:, to prevent the product particles cementing the steel be... |
|
Sulfur Pastillator |
Sulfur pastillatorProduct introduction:The liquid sulfur is fed by means of a jacket pump from the storage tank to the drop former by jacket piping... |
All supplier products
Same products