PCD & PCBN
E-Grind supplies the whole range of pcd cutting tool blanksfor pcbn cutting toolspurpose. The largest Diameter available can be 55mm. Our PCD provides high wearing resistance ability and high finishing surface.
Application of pcd metal
Our plant installs laser cutting machines and surface lapping and finishing machines to provide full service for pcd products. With advanced inspecting machines of SEM, C-SCAN, X-Ray Diffractometer etc. Our plant applies strict Quality Control process.
Non-ferrous metals and alloys: Aluminum/gray iron composite, copper, Aluminum...
Nonmetallic materials: ceramics, plastic, rubber, chipboard...
PCD disc
|
Product |
Diamond Content (Vol%) |
Product Properties |
Application |
|
ET02 |
≥92 |
Very good electrical discharge machining, general life, better heat resistance and impact resistance. |
Superfinishing, excellent surface processing quality for copper, bronze, aluminum, magnesium, magnesium aluminum alloy, plastic, precious metals, etc. |
|
ET05 |
≥92 |
Very good electrical discharge machining, general life, better heat resistance and impact resistance. |
Superfinishing, excellent surface processing quality for copper, bronze, aluminum, magnesium, magnesium aluminum alloy, plastic, plexiglass, etc. |
|
ET10 |
≥95 |
Good electrical discharge machining, long life, better heat resistance and impact resistance. |
Fine machining, very good surface processing quality, for aluminum alloy (Si content＜12%), copper alloy, composite wood processing, high-precision wear-resistant corbelled device, etc. |
|
ET25 |
≥95 |
Good electrical discharge machining, long life, better heat resistance and impact resistance. |
Used for composite, laminate flooring, nonmetal hard and brittle materials, carbide alloy, graphite and graphite composites, aluminum silicon alloy (Si content＞12%), the other high wear-resistant materials, such as ceramics, carbide, etc. |
|
ET35 |
≥95 |
Good electrical discharge machining, very long life, good heat resistance and impact resistance. |
Used for resin, composite materials, fiber reinforced plastics, high density reinforced board, silicon aluminum alloy and other high wear-resistant materials. |
|
ET302 |
≥95 |
Good electrical discharge machining, long life, better heat resistance and impact resistance. |
Used for composite, laminate flooring, nonmetal hard and brittle materials, carbide alloy, graphite and graphite composites, aluminum silicon alloy (Si content＞12%), the other high wear-resistant materials, such as ceramics, carbide, etc. |
Available specification
|
Grain size |
Application |
Grade |
Diameter |
Total thickness |
DIamond table thickness |
Woodworking |
Metalworking |
Conductive |
|
Ultra-fine micron structure for excellent surface finish requirements, |
ET085 |
45 |
√ |
|||||
|
55 |
√ |
|||||||
|
2μm |
For good surface finishing |
ET02 |
45 |
√ |
√ |
√ |
||
|
55 |
√ |
|||||||
|
5μm |
ET05 |
45 |
√ |
√ |
√ |
|||
|
10μm |
General purpose, balance cutting efficiency and life |
ET10 |
45 |
√ |
√ |
√ |
||
|
55 |
√ |
√ |
||||||
|
25μm |
Good wear resistance production,for high Si% Al alloy. |
ET25 |
45 |
√ |
√ |
√ |
||
|
55 |
√ |
√ |
||||||
|
302μm |
ET302 |
45 |
√ |
√ |
√ |
|||
|
55 |
√ |
√ |
||||||
|
35μm |
ET35 |
45 |
√ |
√ |
||||
|
55 |
√ |
PCBN (Polycrystalline Cubic Boron Nitride)
PCBN consists of CBN and Binder. It is produced in high pressure and high temperature. It has excellent performance in hardness, wearing resistance, thermal stability.Application: for hard ferrous materials (hardened steel, cast iron, high-temperature alloy, HSS, Powder metallurgy metals, Ni-Cr alloy...E-Grind provides two series of pcd pcbn:1) Solid CBN2) CBN with Tungsten Carbide supporting.PCBN and SBN Grade
|
Grade |
CBN grit (μm) |
CBN content (Vol%) |
Processing way |
Application |
|
SBN95Z1 PCBN95Z1 |
20、30 |
Continuous cutting with large stock removal |
For Rough processing Grey Cast Iron, Chilled Cast Iron, Powder Sintered Alloy. |
|
|
SBN90Z PCBN90Z |
10、15 |
Continuous cutting with large stock removal |
For Rough process and semi-finishing processing the wear resistant cast iron, nodular cast iron etc. |
|
|
SBN90Z2 PCBN90Z2 |
10、15 |
Continuous cutting with large stock removal |
For rough processing and semi-processing alloy cast iron, high nickel Chrome, high chrome iron and chilled steel with hardness HRC45-50. |
|
|
SBN80G |
3、5 |
Continuous cutting with Medium stock removal |
For rough processing and semi-processing alloy cast iron, high nickel Chrome, high chrome iron and chilled steel with hardness HRC45-50. |
|
|
SBN70G PCBN70G |
3、5 |
Continuous cutting with small stock removal |
For finishing the chilled steel and high temperature alloy with HRC45-55. |
|
|
SBN60G |
1、3 |
Continuous cutting with small stock removal |
For finishing and super-finishing the chilled steel with HRC55-62 like bearing steel, tool steel, mold steel, gauge steel and HSS. |
|
|
SBN55G1 PCBN55G1 |
1、3 |
Slight non-continuous and continuous cutting with small stock removal |
For Finishing and super-finishing the chilled steel with HRC55-65, like bearing steel, tool steel, mold steel, gauge steel and HSS. |
PCBN Blank
Available specifications
|
SPEC |
D(Diameter) (mm) |
T(Thickness)(mm) |
t (CBN section thickness)（mm） |
PCBN55G1 |
PCBN70G |
PCBN90Z |
PCBN90Z2 |
PCBN95Z1 |
|
Ф45×1.2×0.6 |
45 |
√ |
√ |
√ |
√ |
√ |
||
|
Ф45×1.6×1.0 |
45 |
√ |
√ |
√ |
√ |
√ |
||
|
Ф45×3.2×1.0 |
45 |
√ |
√ |
√ |
√ |
√ |
||
|
Ф45×3.8×1.0 |
45 |
√ |
√ |
√ |
√ |
√ |
||
|
Ф45×4.5×1.0 |
45 |
√ |
√ |
√ |
√ |
√ |
Solid PCBN (SBN)Available specifications
Square
|
Spec |
Dimension (mm) |
ISO |
Code |
||||||||
|
L |
Фd |
S |
SBN55G1 |
SBN60G |
SBN70G |
SBN80G |
SBN90Z |
SBN90Z2 |
SBN95Z1 |
||
|
SNMN090300 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
||||
|
5 |
SNMN090400 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
|||
|
13×5 |
13 |
13 |
5 |
SNMN120400 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
|
SNMN150700 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
||||
Disc
|
Spec |
Dimension (mm) |
ISO |
Code |
||||||||
|
Фd |
S |
SBN55G1 |
SBN60G |
SBN70G |
SBN80G |
SBN90Z |
SBN90Z2 |
SBN95Z1 |
|||
|
5 |
RNMN060400 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
|||
|
RNMN090300 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
||||
|
5 |
RNMN090400 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
|||
|
13×5 |
13 |
5 |
RNMN120400 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
|
Square
|
Spec |
Dimension(mm) |
ISO |
Code |
|||||||
|
L |
Фd |
S |
SBN55G1 |
SBN60G |
SBN70G |
SBN80G |
SBN90Z |
SBN90Z2 |
||
|
5 |
CNMN090400 |
√ |
√ |
√ |
√ |
√ |
√ |
|||
|
13×5 |
13 |
13 |
5 |
CNMN120400 |
√ |
√ |
√ |
√ |
√ |
√ |
|
13×8.2 |
13 |
13 |
CNMN120800 |
√ |
√ |
√ |
√ |
√ |
√ |
|
Equilateral triangle
|
Spec |
Dimension(mm) |
ISO |
Code |
||||||||
|
L |
Фd |
S |
SBN55G1 |
SBN60G |
SBN70G |
SBN80G |
SBN90Z |
SBN90Z2 |
SBN95Z1 |
||
|
TNGN110300 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
||||
|
5 |
TNGN160400 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
|||
80° Equilateral hexagon
|
Spec |
Dimension (mm) |
ISO |
Code |
||||||||
|
L |
Фd |
S |
SBN55G1 |
SBN60G |
SBN70G |
SBN80G |
SBN90Z |
SBN90Z2 |
SBN95Z1 |
||
|
9×5 |
9 |
5 |
WNMN080400 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
|
55° Rhombus
|
Spec |
Dimension (mm) |
ISO |
Code |
||||||||
|
L |
Фd |
S |
SBN55G1 |
SBN60G |
SBN70G |
SBN80G |
SBN90Z |
SBN90Z2 |
SBN95Z1 |
||
|
5 |
DNUN110400 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
|||
|
DNUN110600 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
||||
|
DNUN150600 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
||||
Quality Control
C-SCAN：E-Grind supplies an ultrasonic scan photo for each piece of product, which helps customer optimise the cutting areas.
If you want to know more about material pcdand pcbn material, please visit our website.
As one of abrasive powder suppliers, we provide types of cvd diamondsfor sale, if you have needs, please contact us.
Send product request
Other supplier products
 |
CBN Micron Powder | CBN micron has unique characteristics in thermal stability, working efficiency, and sharpness. It can be used in resin, metal, and vitrified system... |
 |
Metal Bond Mesh Diamond | E-Grind's metal bond mesh diamondcombines both using life and working efficiency. Suitable for resin bond, vitrified bond, metal bond, and electro... |
 |
Resin Bond Micron Diamond | Resin bond microndiamondis made from Diamond Resin Bond Mesh. It has a multi-crystalline structure, rough surface, and uniform shape. The sharp edg... |
 |
Coated Diamond / CBN | As one of the abrasive powder suppliers,E-Grind supplies all types of diamond powder including Resin bond diamond, Metal bond diamond, Saw Grit and... |
 |
Scientists Have Developed Nano-cubic Boron Nitride Harder Than Diamonds | Scientists Have Developed Nano-cubic Boron Nitride Harder Than Diamond Diamonds will no longer be the hardest substance in the world! At present, s... |
Same products
 |
DEF Asscher Cut Moissanite | Seller: Guangxi Wuzhou Starsgem Co., Ltd | DEF Asscher Cut Moissanite Product Introduction Material Moissanite Shape... |
 |
Melee Diamond 0.003ct to 0.15ct ( 0.8mm to 3.4mm ) Round Brilliant Cut HPHT Lab Grown Diamond | Seller: Guangxi Wuzhou Starsgem Co., Ltd | Key Features: Size: Melee diamondsare generally less than 0.2 carats. They can range from very ... |
 |
Pink Lab Grown Diamond | Seller: Guangxi Wuzhou Starsgem Co., Ltd | Material：HPHT / CVD Lab Grown Diamond Shape：Fancy Shape Carat：0.1ct to 3.0ct Color：Faint pink/... |
 |
8×8mm Asscher Cut Blue Diamond Color Moissanite 10K Rose Gold Engagement Ring | Seller: Guangxi Wuzhou Starsgem Co., Ltd | 8×8mm Asscher Cut Blue Diamond Color Moissanite10K Rose Gold Engagement Ring Product Descr... |
 |
Starsgem 1ct D VVS2 Oval Brilliant Cut IGI HPHT Lab diamond | Seller: Guangxi Wuzhou Starsgem Co., Ltd | Starsgem 1ct D VVS2 Oval Brilliant Cut IGI HPHT Lab diamond Product Description Material：HPHT L... |
