Needle flame tester
Product description:
Needle flame tester is the needle-shaped burner by a certain size, fill the inside with a specific gas (butane), and at 45 ° angle by fixed time and certain direction to test products, Assess the fire hazard of small flames caused by fault conditions inside the equipment, depending on the test sample Whether ignited, and its ignition time and combustion Length.
Standards:
GB / T 4207-84, IEC 6112, ASTM D3638, DIN 53480 and UL 746A test methods
Scope of application:
Needle flame tester used not only for low-voltage electrical appliances, power tools, machine tools, electrical instruments, household appliances, electrical, electronic equipment, lighting, electrical connections, accessories and other electrical and electronic equipment and components, components research, production and quality Departments, but also for insulating materials, engineering plastics or other solid combustible materials industry
Product features:
1, completely independent of electricity, gas design, use safely
2, military-grade explosion-proof glass
3, the unique delay exhaust system, the machine can continuously run after the exhaust ventilation which can be preset 1 ~ 3min
4, box with high hardness stainless steel
Technical Parameters:
1, the equipment outside size: 1000mm wide × 650mm deep × 1300mm high
2, test background: black background
3, the burning time: 0-999.9s ± 0.1s adjustable (generally selected for the 30s)
4, burning time: 0-999.9s ± 0.1s, automatic recording, manual pause
5, the temperature test range: 0 ~ 1000 ℃
6, the combustion gas: 95% butane gas (can be bottled lighter gas)
7, the flame height: 12mm ± 1mm (with height measurement equipment)
8, the flame temperature requirements: from 100 ℃ ± 2 ℃ rose to 700 ℃ ± 3 ℃ time in 23.5 seconds ± 1 second
9, temperature thermocouple: Φ0.5mm imported armor (K type) thermocouple
10, the burner angle: tilt 45 ° (test) or vertical (height adjustment of the flame)
11, the test process: test procedures for automatic control, independent ventilation
12, the studio volume: 0.5 cubic, stainless steel chassis (0.75 cubic or according to customer requirements made a cubic)
13, needle burner: the hole Φ 0.5mm ± 0.1mm, diameter ≤ Φ 0.9mm, length ≥ 35mm, stainless steel
Send product request
Other supplier products
 |
Cone calorimetric test equipment | StandardsApplication ISO 5660Reaction to fire tests-Heat release, smoke production and mass loss rate.ASTM E 1354Method of test for heat and smo... |
 |
ASTM F2101 bacterial Filtration Efficiency (BFE)Tester | determine the bacterial filtration efficiency (BFE) of medical face mask materials by employing a ratio of the upstream bacterial challenge to down... |
 |
taber Linear Abraser 5750 abrasion tester | The Linear Abraser uses a free-floating head to follow the contours of every sample, permitting testing of finished products. With virtually no lim... |
 |
Water Vapor Permeability Testing Apparatus | Introduction:The device is a constant temperature and humidity moisture permeability test device, which is suitable for sportswear and other requir... |
 |
Steering Transmission Shaft Assembly Torsion Gap Tester | According to the automotive industry standard, the test bench can achieve the steering column of the steering gap, axial clearance, radial clearanc... |
