Protective clothing flame spread tester
Protective clothing flame spread tester is designed and manufactured according to the stan-dard of ISO 15025 protective clothing burning test . It can test the state of flame spread ofprotective clothing under the impact of small flame. The instrument is a professional equip-ment, mainly applied for performance test of flame spread which protective clothing in fireby simulation technology.
Technical Parameters：
| Items |
Parameters |
| Dimension ： |
1200mm X 600mmx 1200mm |
| Timer accuracy ： |
0.1s |
| Power supply ： |
220v，50/60Hz |
Application：
The instrument is applied for thetesting of fire hazard using com-bustible materials, like fabric orother similar functional materials.
Technical Parameters：
1. Combustion chamber is made of stainless steel, high corrosion resistance, long service life.
2. The instrument is good appearance and generous in design with transparent glass window,
easy to observe the test.
3. All the sample rack are made of stainless steel; good-looking, corrosion-resistant.
4. Standard burner; horizontal flame height 25mm ± 2mm; vertical flame height 40mm ± 2mm;
nozzle diameter 0.19mm.
5. Timer for automatic recording and storage.
6. PLC with touch screen control system can achieve more intelligent test. Test data are auto-
matically recorded and stored.
7. Imported brand pressure gauge and control valve for more sable air pressure.
8. Imported needle valve can precisely control the flame height. The flame is more stable.
9. High intelligence, easy to operate.
10.Two sets of sample racks for surface and bottom burning, all made of stainless steel.
11. System offers automatic ignition and flame-out.
12. Flame height gauge equipped, easy to adjust the flame height.
13. Automatic ignition with high voltage of pulse electronic .
14. The timing button coordinated with the PLC automatically records and stores the combus-
tion time.
15. No need of hand-held stopwatch or manuscript for timing. System can automatically record
the test time and print test reports.
16. Test time and flame enrichment time can be set on the touch screen so that can meet the test
standards.
17. Test program for surface burning and bottom-edge burning can be switched on the touchscreen.
Other supplier products
|
|
Digital Elmendorf Tearing Tester |
Digital Elmendorf Tearing Tester
Standards:
ASTM D1424/D689, NEXT 17, M&S P29, BE EN ISO 13937/4674, BS 4468, DIN EN 21974, GB/T 3917.1, ISO ... |
|
|
Digital Hydraulic bursting strength tester |
Standards： GB/T7742, FZ/T60019, ISO 13938.2, NEXT TEST METHOD 22 2006 ,WOOLMARK TM29 2000,EDANA 80.3-99,ISO 2758,ASTMD 3786,JISL108 Scope of appli... |
|
|
Medical Mask Differential Pressure Tester |
Standards:
EN 149, EN 14683, ASTM F2100, MIL-M-36954C, GB 19083, GB 2626, YY/T 0969-2013
Applications:
Medical Mask Differential Pressure ... |
|
|
Bally Flexing Tester (Flexometer) |
Bally Flexing Tester (Flexometer) is designed for flexing resistance test to bending or other types of failure at flexing creases. The Flexometer ... |
|
|
Heel Impact Tester |
Heel Impact Tester is used to determine the impact strength of heels of ladies’shoes.
Application:
This Heel Impact Tester is used to det... |
All supplier products
Same products
