Fabric Hand Feel Tester
Brief Introduction:
By softness value of the test material and objective evaluation of its feeling (touch) performance for softness test fabrics, textiles, non-woven, sanitary paper, leather and other sheet-like soft material.
At the same time, the use of different accessories, you can also test a sample of the elastic / viscoelastic / plasticity, bursting, compressibility, thickness and basis weight and other performance indicators
Product Description:
The new type of concrete works softness measuring method is as follows: The main components of the instruments are a rotor, a vibration sensor and other sensors used to collect additional data and control instrument functions.
For the measurement, the sample rests on the rotor, when the rotor starts to rotate to reach the final position.
Mutual contact between the rotor and the sample so that the sample vibrate. After the vibration sensor receives the vibration signal, which is transmitted to the analysis component.
Analysis component prepared good data transfer to the computer. Then, through a complex computer calculations of these data are processed.
Use a complex formula, the parameters measured by synchronizing further parameters and customer pre-entered (the maximum you can use 68 different parameters) to calculate the value of soft.
Technical Data:
Software: friendly interface, simple operation. Test data can be stored for a long, always call data storage software, data were compared with the current test.
Sample size: φ112.8 mm
Measurement: smoothness / roughness, softness, stiffness, feel value (HF)
Measuring pressure: 100mN, 600mN
Instrument size: 440x190x470 mm (H x W x D)
Weight: 19 kg
Power supply: 115-230 VAC, 50/60 Hz
Users:
Chemical suppliers
Paper machine builders
Nonwovens producers
Nonwovens converters
Textile producers
Textile converters
Machine builders for nonwovens
Printing machine builders
Universities & Institutes
Retailers
Fiber manufacturers
Fashion labels
Application areas:
Process optimization
Process control
Production control
Product optimization
Benchmarking
R&D
Incoming control
Quality assurance
Complaint management
Troubleshooting
Marketing & Sales
Results:
Smoothness / Roughness
Softness
Flexibility / Stiffness
Hand Feel (depending on mathematical models)
Plasticity (characterizing the recovery behaviour)
Hysteresis (characterizing the recovery behaviour)
Recovery / Springback behaviour
Elasticity (depending on recovery properties)
Thermal haptics / Surface thermal conductivity
Thermal insulation
High-resolution image from the sample
Send product request
Other supplier products
| Electronic single fiber strength meter | Compliance Standards - GB/T14337 - GB/T9997 - GB/T13835.5 - GB/T21120 - ISO5079 - ISO11566 - ASTM D3822 - BS4029 Application Scope - Used... | |
| SUGA SX75 7.5kW Super Xenon Weather Meter | SX75 accelerates the degradation of materials by exposing them to simulated outdoor and indoor environments such as sunlight,temperature,humidity... | |
| Shoelace anti-siphon tester | Product Introduction Shoelace anti-siphon tester is suitable for all kinds of waterproof leather, leather, mesh, waterproof shoelace, ribbon water... | |
| Thermal Elongation Tester | Standard IEC 60811-1-1: Electric cables – Thermal elongation tests for insulations and sheaths. ASTM D638: Standard test method for ten... | |
| Cantilever Fabric Stiffness Tester | Standard ZB WO4003. GB/T18318. ASTM D 1388. IS09073-7. BS EN22313 Application Fabric Stiffness Tester, is a practical equipment to determine the... |
Same products
| HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... | |
| PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... | |
| PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... | |
| PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... | |
| PanBox welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |













