Geotextile Effective Aperture Tester
Scope of application:
The equivalent pore diameter of geotextile and its related products was determined by dry screening method. The geotextile sample is used as the screen cloth, the standard particle material with known diameter is placed on the geotextile above the vibrating screen, and the sieve rate is calculated by weighing the standard particle material weight of ten industrial cloth, and the sample is replaced by the standard particle material with different diameters. The aperture distribution curve of the textile is drawn and the value of 090 is obtained.
Meet the standard:
GB/T14799-2005.ASTM D4751-2004.JTG E50 T1144-2006.SL/T 235-7-2012. etc
Instrument features:
Adopts split type design to avoid damage to the control system caused by vibration during high-speed operation.
Using mechanical vibrating screen vibration, smooth and efficient;
Vibrating screen can carry out shaking and shaking two vibration modes, vibration frequency is stable;
Equipped with locking protection device, strengthen the stability of the fuselage;
It is equipped with an anti-static device to prevent glass beads from gathering on the surface of the sample due to electrostatic action;
+5 sets of sieve parallel sample test, energy saving and high efficiency;
Digital display time, vibration time can be set;
Easy to install, easy to operate.
Technical parameters:
The inner diameter of the screen is 200mm
The screen is made of aluminum
Screen stack height 400mm
Screen seat amplitude 8mm
Vibration frequency 221/min
Vibration frequency 147/min
Turning radius 12.5mm
The timer ranges from 0 to 99 minutes and 59 seconds
Power supply AC380V 50HZ
Dimensions Host 600x380x1000mm
Control box 330x290x105mm
Weight 130kg
Send product request
Other supplier products
 |
Fogging Tester | Standards DIN 75201: Automotive trim material fogging resistance. ISO 6452: Coated fabrics fogging behavior in vehicle interiors. SAE J1756: A... |
 |
Voltage Drop Tester for Automotive Wire Connectors | The voltage drop tester for automotive wire connectors is suitable for measuring the voltage drop at similar connection interfaces such as the pi... |
 |
Falling ball rebound instrument | Product Introduction: The falling ball rebound instrument is designed and manufactured according to GB/T6670-2008 or ISO8307 or ASMD3574. It is su... |
 |
Geomembrane Texture Height Tester | Meet the standard CJ/T 234- Appendix F-2006，ASTM D7466/D7466M-23 Instrument features Design and manufacture according to the standard, in line w... |
 |
Scratch-resistance testing machine | Product Introduction: Low voltage wire and cable scratch-resistance tester for road vehicles is a device used to scratch the insulating surface ... |
Same products
 |
Blanket Flammability Test Machine | Seller: Standard Groups | Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ... |
 |
High Temperature Oxygen Index Tester | Seller: Standard Groups | The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125... |
 |
Limiting Oxygen Index Tester | Seller: Standard Groups | The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb... |
 |
Vertical Flammability Tester | Seller: Standard Groups | Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe... |
 |
45 Degree Flammability Tester | Seller: Standard Groups | Application 45 Degree Flammability Tester is used to determine the burning characteristics of te... |
