Fire retardant coating tester large plate method
Product Introduction
The tester conforms to the technical indicators and requirements specified in the national standard GB12441-2005. and is suitable for the test of the fire resistance performance of the decorative fire retardant coating under the conditions of the laboratory (expressed by the combustion mass loss and chemical volume).
Standards
GB12441-2018，
GB12441-2005
Features
1. The degree of automation is high, and the temperature error is lower than the national standard
2. Reasonable structure design, convenient operation, and maintenance
3. Touch screen control, easy to test
Technical Parameter
1. PLC + NA view professional software, touch screen control, easy to operate
2. Voltage and power: 220V±10%, 50HZ, 300W
3. Working environment: indoor without forced ventilation
4. The air volume of the blower (1~5) m3/min can be adjusted
5. Armored thermocouple: the outer diameter is not more than 3mm, the wire diameter is 0.5mm, the accuracy is not lower than class II, and the range is 1300ºC
6. The timer error is not more than 1s/h
7. Five-way thermocouple temperature measurement on the back fireside, automatic alarm when the temperature reaches 220 ºC
8. Ambient temperature: -5ºC~30ºC
9. Relative humidity: ≤85%
10. Gas source: liquefied petroleum gas (Note: the user provides gas source and connector)
11. Dimensions of the instrument: Test plate bracket: 760 mm* 760 mm* 1500 mm; Control box: 800 mm* 500 mm* 500 mm;
12. Specimen size: 900mm*900mm*5mm + 0.2mm first-class five-layer plywood
13. Automatically control time - temperature rise curve and record
14. Automatic alarm when the backfire temperature reaches 220ºC
Send product request
Other supplier products
 |
Temperature and Humidity Alternating Test Chamber for Automotive Wires-QINSUN | The temperature and humidity alternating test chamber for automotive wires conducts temperature and humidity alternating tests on automotive wire... |
 |
Steel Structure Fireproof Coating Small Sample Test Furnace | Product Overview TheSmall Sample Test Furnace for Steel Structure Fireproof Coatingis a specialized thermal testing instrument designed to evaluat... |
 |
Reciprocating Wear Tester | Standards ASTM F2496: Scratch hardness and adhesion testing for prints/coatings. ISO 1518-1 & -2: Scratch resistance determination for pain... |
 |
Paper folding tester | Standards: ISO 2758、ISO 2759 ASTM D774、 D774M TAPPI T 403、TAPPI T 804 Test principle： The machine uses the motor drive screw to move the fixtu... |
 |
Industrial chillers | Applicable Standards Industrial chillers adhere to global safety and performance regulations, including: ASHRAE 15(Safety Standard for Refrig... |
Same products
 |
Common Rail Injector Valve F00R J02 012 | Seller: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
 |
Common Rail Injector Valve F00R J02 005 | Seller: 868983 | Common Rail Injector Valve F00R J02 005 David Chen |
 |
Common Rail Injector Valve F00R J01 945 | Seller: 868983 | Common Rail Injector Valve F00R J01 945 David Chen |
 |
Common Rail Injector Valve F00R J01 941 | Seller: 868983 | Common Rail Injector Valve F00R J01 941 David Chen |
 |
Common Rail Injector Valve F00R J01 924 | Seller: 868983 | Common Rail Injector Valve F00R J01 924 David Chen |
