Steel Structure Fireproof Coating Small Sample Test Furnace
Product Overview
TheSmall Sample Test Furnace for Steel Structure Fireproof Coatingis a specialized thermal testing instrument designed to evaluate the fire resistance and structural integrity of fireproof coatings on steel substrates under controlled fire conditions. It simulates real-world fire scenarios to quantify flame spread, heat resistance, and coating adhesion, ensuring compliance with international fire safety standards for steel structures.
Type: High-temperature thermal testing furnace
Standards Compliance:
ASTM E119 (Fire resistance rating)
ISO 834-1 (Standard fire curve)
GB/T 9978.1 (Chinese fire resistance test)
Key Metrics
Fire Resistance Duration (minutes)
Surface Temperature Rise (ΔT, °C)
Coating Adhesion Strength (MPa)
Sample Size: Up to 150×150×50mm (steel plate with coating)
Key Features
Compact Design:
Optimized for small steel samples (e.g., bolts, brackets)
Lightweight (≤50kg) for lab/bench use
Advanced Features:
Real-time thermal imaging (°C gradient mapping)
AI-based coating degradation analysis
Programmable multi-stage fire cycles
Applications
Construction:Testing fireproof coatings on steel beams/columns
R&D:Developing high-temperature-resistant coatings
Quality Control:Batch inspection of pre-coated steel components
Forensic Analysis:Evaluating fire damage to structural elements
Standard Operation Workflow:
Sample Preparation: Mount steel plate with coating in sample holder
Parameter Setup: Select fire curve (e.g., ISO 834 standard)
Testing: Initiate heating cycle (e.g., 1-hour fire resistance test)
Analysis: Measure temperature rise and coating integrity
Cleaning: Automated ash removal system
Safety Precautions
Heat-resistant gloves and goggles required
Fire-rated enclosure mandatory (class A60)
Maintain 1m clearance from exhaust vents
Technical Parameters
| Parameter | Specifications |
|---|---|
| Temperature Range | 20°C–1000°C (±1°C accuracy) |
| Heating Rate | 10°C/min (PID-controlled ramping) |
| Chamber Dimensions | 300×300×400mm (L×W×H) |
| Heating Elements | Silicon carbide (SiC) ceramic heaters |
| Control System | Programmable logic controller (PLC) + 7-inch touchscreen |
| Power Supply | 380V/50Hz, 2.5kW |
| Dimensions | 600×500×800mm (L×W×H) |
Send product request
Other supplier products
 |
Rubbing Color Fastness Tester/Rubbing Fastness Tester for Textile | StandardsBS 1006 D02； ISO 105 D02 X12； AATCC 8 165； GB/T 3920； NEXT TM6 M&S C8 C8AApplicationThis instrument is applicable to the test of color... |
 |
Shoe Peeling Strength Tester | |
 |
Low-Temperature Bending Resistance Tester | Applicable Standards The tester adheres to international standards for material testing at low temperatures, including: ISO 4674-2(Rubber- or pla... |
 |
Car seat fatigue tester | Applicable standards: GB/T 18941-2003"Test method of foam polymer materials for car seats" : This standard specifies the test method of foam pol... |
 |
seat foam compression hardness tester-QINSUN | Applicable standards: GB/T 6670-2008"Determination of falling ball resilience of soft foam polymeric materials" : This standard specifies the test... |
Same products
 |
Tabletop Xenon Arc Weathering Tester (SunMaster) | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Water-Cooled Xenon Lamp Weat... |
 |
Blow-By Test Rig | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test system for the characterisa... |
 |
Air filter System（ISO 16890/EN 779） | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Filter test system for general a... |
 |
Oil Thread Leak Test System | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test System for oil thread leak ... |
 |
Manual HEPA/ULPA Filter Scanning Test System | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Manual HEPA/ULPA Filter Scan... |
