Carton Clamp Tester
Product introduction：
This machine mainly aims at the ability of the product to withstand the pressure of
lead from the car when the product is packed in the warehouse or truck, train, etc., so as
to evaluate the damage of the product.
This machine adopts servo motor control, full computer operation, high-grade configuration.
Tests are customized according to ASTM D6055, U.S., SEARS, corporate standards, or
customer specified non-standard requirements.
Compliance Standards:
ASTM D6055
U.S. SEARS
Product Features:
Based on the provided information and typical clamp tester designs:
Servo motor control: Utilizes Japan Panasonic servo motors for precise and dynamic control of clamping plate movement and applied force.
Full computer operation: Enables comprehensive control, programming, data acquisition, and analysis via a computer interface.
High-grade configuration: Implies the use of quality components for reliable performance.
Clamping mechanism: Consists of two parallel splints (clamping plates) that apply horizontal pressure to the test sample.
Adjustable clamping pressure: The pressure applied can be adjusted within a wide range (400 - 3000 Lb).
Adjustable clamping plate height: The height of the clamping plates can be set to accommodate different package heights (0-1000mm adjustment range).
Adjustable speeds: Allows control over lifting speed (10-500mm/min) and clamping speed (10-50mm/min).
Adjustable splint expansion width: The distance between the clamping plates can be adjusted to accommodate different package widths (200-2000mm).
Scope of application：
Applicable to all product packaging testing and verification. The main test is that the
product packaging is subjected to horizontal pressure during transportation and storage
The deformation of the force and the protection ability of the packaging inside the
package, so as to improve the packaging design.
Technical parameter：
Sample shape: parallelepiped transport package
Maximum test weight: 100kg
Clamping pressure: 400——3000Lb（adjustable） pressure can be applied on the
corresponding surface according to the handling diagram on the test sample
Clamping plate surface size: 1100x1100mm（L/W）
Test space size: 1000x1000x1000mm（length, width and height）
Clamping plate height adjustment: 0-1000mm can be set
Lifting speed: 10-500mm/mi adjustable
Clamping speed: 10-50mm/min adjustable
Splint expansion width: 200——2000mm
Transmission mode: Japan Panasonic servo motor （left and right clamps）
Base plate size: 2000x1900mm
Protection device: leakage protection limit device
Cleat requirements: Two gripper plates in the working state （2000 pounds） to ensure
smooth without deformation. The two splints are parallel to each other, and the splints are
vertical to the floor. The thickness of the splint shall not be less than 20mm
Force corrector: With force value display, used to correct the clamping pressure
Force accuracy: national standard 1.6 level
Send product request
Other supplier products
 |
Automotive Wires Dynamic Bending Tester | Standard ISO 6722: Road vehicles – Flexible cables for wiring harnesses. SAE J1128: Low-voltage primary cable for automotive applicatio... |
 |
Blanket Flammability Test Machine | Introduction Bed Blanket Flammability Tester is used to detect the flame retardant performance of the bed blanket fabric and the flame spread prop... |
 |
Shoe Lace and Eyelet Abrasion Tester | Meet the standard SATRA TM93 DIN4843 QB/T 2226 SATRA TM 154 BS 5131:3.6:1991 ISO22774 Main uses The shoelace eye wear testing machine is ... |
 |
High and low temperature memory impact testing machine | Product Introduction: Computer controlled memory impact testing machine is mainly used for hard plastics, reinforced nylon, glass steel, ceramics,... |
 |
Drying Rate Tester | The drying rate tester is a professional device used to measure the drying rate of a substance. Application fields Textile industry: used to eva... |
Same products
 |
Air Intake Filter Test System | Seller: Standard Groups | The Air Intake Filter Test System is designed for testing industrial air filters and engine air f... |
 |
Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging | Seller: Standard International Group (HK) Limited | The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f... |
 |
Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester | Seller: Standard International Group (HK) Limited | The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter... |
 |
HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ... |
 |
VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine | Seller: Standard International Group (HK) Limited | The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia... |
