Thermal Elongation Tester
Standard
IEC 60811-1-1: Electric cables – Thermal elongation tests for insulations and sheaths.
ASTM D638: Standard test method for tensile properties of plastics.
ISO 815: Rubber – Determination of compression set at elevated temperatures.
Product Advantages
Multi-Channel Efficiency
Simultaneously test 3 samples with independent fixtures, cutting analysis time by 66%.
Precision Load Configuration
Modular weight system (1g–100g) enables precise force application for diverse materials.
Corrosion-Resistant Design
304 stainless steel components withstand high temperatures and acidic/basic environments.
User-Centric Operation
Digital temperature controller (±0.1°C accuracy) with overheat protection and audit trail.
Versatile Application
Suitable for cables, polymers, rubber, and composites up to 300°C.
Product Features
Testing System
3 Upper Fixtures: Quick-release clamps for secure sample mounting.
3 Lower Fixtures + Hanging Plates: Adjustable height for vertical alignment.
150mm Stainless Steel Rulers: Laser-etched scale for ±0.05mm elongation measurement.
Weight System
Total Weights: 3×1g, 6×2g, 3×5g, 3×10g, 6×20g, 3×50g, 6×100g (combinable up to 1.155g).
Suspension Rod: Calibrated for balanced load distribution.
Temperature Control
Range: Ambient to 300°C (programmable ramp/soak profiles).
Uniformity: Forced-air circulation ensures ±2°C zone consistency.
Safety & Compliance
Over-temperature alarms, emergency stop, and CE-certified electrical safety.
Technical Parameters
| Component | Specification |
|---|---|
| Fixtures | 3 upper + 3 lower clamps (304 stainless steel) |
| Rulers | 3×150mm (0.1mm divisions, laser-etched) |
| Weights | 1–100g modular set (total 3.450g) |
| Temperature Range | Ambient – 300°C (±0.1°C control) |
| Chamber Volume | 400 × 300 × 300 mm (W×D×H) |
| Power Supply | 220V/50Hz, 1.8 kW (programmable PID controller) |
| Dimensions (L×W×H) | 600 × 500 × 1.200 mm |
| Weight | 45 kg (net) / 60 kg (gross) |
Send product request
Other supplier products
 |
Impact strength tester for car seat launching headrest | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, which is a key parameter to simulate vehicle collis... |
 |
Wire Cut - through Tester for Ford Automotive Wires | Applicable Standard: Engineering Specification - Ford Global Wire specification, PART NO. ES - AU5T - 1A348 - AA Technical Parameters: 1. Sens... |
 |
Automotive Wires Low - temperature Winding Tester | The low - temperature winding tester for automotive wires is used to assess and determine the performance of circular wire cables or circular ins... |
 |
Yarn Twist Tester | Application ScopeThe yarn twist tester is an instrument used to measure the twist of yarns and their related technical indicators.Applicable Standa... |
 |
ISO 12103-2 M2 Test Dust | Product Introduction: Particle Technology Fuel Contamination Test Dust offers a full range of fuel contamination test materials used to test the... |
Same products
 |
Briefly describe the importance, core functionality and how to implement a hospital clock system solution | Seller: California Triangle | In the healthcare industry, precise time synchronization is critical. Every second can be a matte... |
 |
Sand and Dust Test Chamber for Automotive Connectors | Seller: Standard International Group (HK) Limited | Operating Conditions: Ambient temperature: 5°C～+28°C (average temperature within 24 hour... |
 |
Automotive Connector SO₂/H₂S Corrosion Test Chamber | Seller: Standard International Group (HK) Limited | Standards: GB/T 10587-89. GB/T 2423.9-93: Chinese national standards for sulfur dioxide corrosio... |
 |
Automotive Connectors Salt Spray Tester | Seller: Standard International Group (HK) Limited | Applicable Standards: Neutral Salt Spray (NSS) Tests: GB/T2423.17. ISO 3768/3769/3770. ASTM B117... |
 |
Air - tightness Testing Device for Automotive Connectors | Seller: Standard International Group (HK) Limited | Main Functions: 1. Provide stable positive and negative pressures for testing the air - tightnes... |
