QMD pneumatic high pressure cleaner
QMD air motor driven high pressure tank cleaning machine
This QMD air motor-driven three-dimensional cleaners are suitable for small to medium sized tanks and IBC totes, such as fuel ethanol, beer, chemical, industrial fermentation industries and occasions that require high-impact cleaning.
Working Principle:
This QMD series cleaner is driven by an external motor to drive cleaning head to rotate.
The gear mechanism runs according to the set trajactory to realize rotation and revolution,
thereby realizing 360 coverage impact indexed cleaning of the inside of tanks and process vessels.
Features & Benefits:
●High Using dynamic seal at leakage point to reduce leakage (less than 3% leakage). thus saving cleaning fluid.
●The nozzle have a unique steady flow design which can make the jet be more concentrated and have great impact.
●Driven by an external air motor, used in explosion-proof applications. Much safer.
●Low consumption of fluid.
Application:
This QMD series high pressure motor-driven three-dimensional cleaners are suitable for small to medium sized tanks and IBC totes, such as fuel ethanol, beer, chemical, industrial fermentation industries and occasions that require high impact cleaning.
Send product request
Other supplier products
 |
Flame retardant paper and board burning tester | Technical parameters: 1. Ambient temperature :-10℃——30℃ 2. Relative humidity :{<}85% 3. Power supply voltage and power :220V 10% ... |
 |
Geosynthetics Bursting Strength Tester | Meet the standard: ASTM D3786-2008.SL/T .etc Scope of application: It is used to determine the bursting strength of geotextiles, geomembranes an... |
 |
Toyota Specialized Abrasion Tester-QINSUN | Standard JIS L 0849(Japanese Industrial Standard for Abrasion Resistance of Textiles) ISO 5470-2(Rubber- or Plastics-Coated Fabrics — Abras... |
 |
Zipper torsion tester | Product Introduction: The zipper torsion tester is used to test the binding strength of the zipper pull head and whether it can withstand the spec... |
 |
Aircraft wire wear testing machine | Applicable standards: GJB17.9. MIL-W-81381A, MIL-T-5438 and ISO R1220. 1491 and other standards Main parameters: 1. sand belt length counting ra... |
Same products
 |
Seat Bumping and Creep Test Bench | Seller: Standard International Group (HK) Limited | This test bench is used for simulating the car seat bumping and creep situation when a car is run... |
 |
Automobile seat belt fixed point test bench | Seller: Standard International Group (HK) Limited | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur... |
 |
Impact strength tester for car seat headrest | Seller: Standard International Group (HK) Limited | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi... |
 |
Impact strength tester for car seat launching headrest | Seller: Standard International Group (HK) Limited | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w... |
 |
Automobile Headrest Strength Tester | Seller: Standard International Group (HK) Limited | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me... |
