Paper absorbance tester
Introduction:
It is an instrument used to determine the surface water absorption of coated paper and cardboard, including corrugated board. It is designed according to the principle of the international general bur method. The instrument adopts the flip type, the operation is simple, convenient, safe and reliable.
Standards:
ISO 535 Paper and board - Determination of water absorption (Kob method)
GB/T 1540 "Determination of water absorption of paper and board"
Advantages:
Measures Key Water Resistance Property: Quantifies the amount of water absorbed by the material surface, providing a direct measure of its water resistance.
Standard Compliant (Cobb Method): Designed based on the internationally recognized Cobb method, ensuring results are comparable and meet industry standards.
Applicable to Various Board Types: Suitable for testing coated paper, cardboard, and corrugated board.
Simple and Convenient Operation: The flip-type design facilitates ease of use.
Safe and Reliable: Designed for safe handling of water and samples during the test.
Features:
Test vessel or cylinder with a standardized measuring area (100 ± 0.2 cm²) where the water is contained and the sample's surface is exposed.
Clamping mechanism (often a lever or screw type) to firmly secure the paper or board sample against the opening of the test vessel, creating a watertight seal for the defined measuring area.
Flip type design allowing the vessel to be easily inverted for draining the water after the test.
Roller with a specified width (200 ± 0.5 mm) and weight (10 ± 0.5 kg) used to blot excess water from the surface of the sample after the exposure time.
Base or stand to support the test vessel and roller.
Designed to accommodate samples of a certain diameter (125 ± 5 mm recommended for cutting the test specimen).
Durable construction suitable for laboratory use.
Likely includes markings or indicators for the water level in the vessel.
Parameters:
Measuring area (cm²) : 100±0.2
Roll width (mm) : 200±0.5
Roll weight (kg) : 10±0.5
Sample diameter (mm) : 125±5
Instrument size (length * width * height)mm: 270*400*300
Net weight (kg) : 25
Send product request
Other supplier products
 |
Wire Bending Test Machine | Product Introduction: Wire bending tester meets JIS-C-3005 test standard. The sample is inserted through the specified round hole according to thi... |
 |
Fogging Tester for Automotive & Textile Materials-QINSUN | Standard DIN 75201(Determination of the Evaporation Behavior of Materials in Motor Vehicles) ISO 6452(Rubber- or Plastics-Coated Fabrics &mdash... |
 |
Rail transit car wire abrasion testing machine | Applicable standards: GBIT 12528-2008 Standard for cables for rail transit vehicles with a rated AC voltage of 3KV and below Main parameters:... |
 |
Textile Bonded Door Drench Tester | I. Product Overview TheTextile Bonded Door Drench Testeris a specialized instrument designed to evaluate the water resistance and durability of te... |
 |
Carpet Flammability Tester | Instrument Features - Equipped with a measuring grid and a positioning ring - The sliding plate facilitates operation - The mirror enables easy ob... |
Same products
 |
Metal Ring-and-Block Friction and Wear Tester | Seller: Standard Groups | This friction and wear tester is designed and manufactured in accordance with the national standa... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard Groups | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
Sliding bearing PV friction testing machine | Seller: Standard Groups | The sliding bearing PV friction testing machine is primarily used to evaluate the friction and we... |
 |
High temperature vacum friction & wear tester | Seller: Standard Groups | High temperature vacuum friction and wear testing machine is mainly used to study the friction an... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard Groups | Dry and wet sand abrasive wear testing machine is mainly used to evaluate the wear resistance of ... |
