Footwear Flexing Tester
Product Introduction:
The finished shoe resistance zigzag tester drives the zigzag part of the finished shoe to zigzag repeatedly with the zigzag Angle matched by the shoe type and the fixed rate of the zigzag machine. After reaching the preset time or completing the specified zigzag number, the damage of the zigzag part of the finished shoe is observed and tested. To complete the number of twists and turns without damage or complete the specified number of twists and turns of the finished shoe to evaluate the zigzag resistance of the finished shoe.
Standard:
SATRA TM92 and other standards.
Main Functions:
Test sports shoes, casual shoes, work shoes and other finished shoes, after a long time, fixed frequency, fixed Angle of continuous bending, evaluate its folding performance or check its cracking degree.
Product Advantages:
Measures Finished Shoe Durability: Evaluates the flexing resistance of the entire shoe under simulated walking conditions, providing a realistic assessment of its durability.
Standard Compliant: Designed to meet relevant standards for finished footwear flexing resistance testing.
Multiple Testing Stations: Allows testing of two pairs of shoes simultaneously, increasing testing efficiency.
Controllable Test Parameters: Provides precise adjustment of bending angle and flexing speed to match different shoe types and test requirements.
Quantitative Evaluation: Results are based on the number of flexing cycles, either to a certain level of damage or to a specified total.
Suitable for Various Shoe Types: Applicable to a range of finished footwear, including sports, casual, and work shoes.
Includes Cycle Counter: The integrated counter provides an accurate record of the number of flexing cycles performed.
Precise Speed Control: The variable frequency motor ensures accurate and stable test speeds.
Technical specifications:
1. Two pairs of shoes can be tested at the same time
2. Zigzag Angle: adjustable from 5 to 90°
3. Resistance to zigzag speed: 5 to 150cpm adjustable (with speed display)
4. Permissible sample length: 150 to 400mm
5. Volume: 105*83*78cm
6. Motor: variable frequency motor
7. Counter: LCD,0-9999.999
9. Power: AC220V, 10A
Send product request
Other supplier products
 |
SUGA GX75 7.5kW Xenon Weather Meter | Applicable Standards The GX75 meets stringent international standards, including: ISO 4892-2,ASTM G155,SAE J2527(automotive coatings) JIS K7... |
 |
Geosynthetic Transmissivity Tester | Scope of application: It is used to measure the characteristics of the plastic drainage plate in the plane direction of the water flow under the s... |
 |
Torque Rheometers | Product Introduction Torque rheometer is the ideal device to study the flow and deformation, plasticization, thermal shear stability, dynamic rheo... |
 |
EN sole bending tester | Product Introduction: The EN sole bending tester is used for 90 degree bending test of the sole of rubber, EVA and other zigzag shoes to detect it... |
 |
Car seat belt locking performance tester-QINSUN | Applicable standards: Automotive seat belt locking performance tester mainly meets the following national or industry standards: GB 14166-2013Sea... |
Same products
 |
Blanket Flammability Test Machine | Seller: Standard Groups | Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ... |
 |
High Temperature Oxygen Index Tester | Seller: Standard Groups | The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125... |
 |
Limiting Oxygen Index Tester | Seller: Standard Groups | The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb... |
 |
Vertical Flammability Tester | Seller: Standard Groups | Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe... |
 |
45 Degree Flammability Tester | Seller: Standard Groups | Application 45 Degree Flammability Tester is used to determine the burning characteristics of te... |
