Voltage Drop Tester for Automotive Wire Connectors
The voltage drop tester for automotive wire connectors is suitable for measuring the voltage drop at similar connection interfaces such as the pins of non - rewirable plugs and the leads of connecting plugs, so as to judge the quality of the connection interfaces. It can also be used for testing the contact voltage drop of terminals in connectors and wire harnesses. It complies with the ISO 8092.1 - .4 series of standards and relevant standards such as QC/T417.1 - 417.5 - 2001 for automotive wire harness connectors.
Technical Features:
This instrument features adjustable high - current output, micro - voltage testing, and digital tube display.
Main Parameters:
1. Input voltage: AC220V + 10%, 50Hz
2. Working current (DC): 0 - 100A (optional values including 5A, 10A, 20A, 50A, 100A, 200A, 500A, 1000A) and can be adjusted arbitrarily 3. Current output mode: Constant current
4. Voltage drop range: 0 - 20V (with three voltmeters of different accuracies for 0 - 200mV / 0 - 2V / 0 - 20V). The display ranges are 0.01 - 199.99mV / 0.1 - 1999.9mV / 1 - 19999mV respectively
5. Power: 3200W, maximum output voltage: 32V
Qinsun Instruments Co., LTD is a professional laboratory testing instrument manufacturer in China,Have been focusing on laboratory instrument R&D more than 30 years and have rich industry experience,Based on international testing standards,We are also the instrument supplier for BV SGS laboratory,We provide one-stop solutions for lab instruments,Free Training and Turn-Key Service,Products exported all over the world,Offer 36 month warranty and are a trustworthy partner.
Send product request
Other supplier products
 |
Fabric liquid penetration tester | Main Parameters 1. The penetrating disc is made of special organic glass through special processing, ensuring a weight of 500 grams ± 5 gra... |
 |
Safety shoe impact testing machine | According to the criteria: Bs-953,1870 EN-344, ANSI-Z41 CSA-Z195 ISO K88782 EN ISO 20344, ANSI-Z41 BS EN-344 CSA-ZI95 LD50-1994 AS/NZS 2... |
 |
Car seat center of gravity measuring tester-QINSUN | Main parameters: Measuring range:refers to the maximum and minimum range of the center of gravity of the seat that the tester can measure. This ... |
 |
Automobile wire corrugated pipe drag grinding machine | Standards: ISO 6722. QC/T730. JIS C 3046. JASO D 611. SAEJ1128-2005. JBT 8139.TBT 1484.1-2001 Part1. EN50305. EN50306and other standards Parame... |
 |
Paper water absorption tester | Introduction: Paper water absorption tester, also known as Kleim test instrument, is suitable for the determination of the capillary suction heigh... |
Same products
 |
Seat Bumping and Creep Test Bench | Seller: Standard International Group (HK) Limited | This test bench is used for simulating the car seat bumping and creep situation when a car is run... |
 |
Automobile seat belt fixed point test bench | Seller: Standard International Group (HK) Limited | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur... |
 |
Impact strength tester for car seat headrest | Seller: Standard International Group (HK) Limited | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi... |
 |
Impact strength tester for car seat launching headrest | Seller: Standard International Group (HK) Limited | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w... |
 |
Automobile Headrest Strength Tester | Seller: Standard International Group (HK) Limited | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me... |
