Shoe Abrasion Tester
Product Introduction:
The whole shoe wear testing machine is used to test the wear resistance of soles and sole pieces. The principle is to press the rotating grinding head vertically above the sample, and carry out rotary wear test on the test sample at a certain load weight and a speed of 191r/min. After the test is completed, the wear length of the sample is measured to evaluate whether the sample is qualified.
Reference standard:
GB/T 3903.2-2017, QB/T4329-2012 and other standards
Product Advantages:
Measures Key Durability: Quantifies the wear resistance of shoe soles, a direct indicator of footwear durability and expected lifespan.
Standard Compliant: Designed to meet national standards (GB/T 3903.2. QB/T 4329) for shoe wear testing.
Controllable Test Parameters: Allows for precise control of load, speed, and test time according to standard requirements.
Uses Standardized Abrasive: Utilizes a grinding wheel with detailed specifications to ensure consistent abrasive action.
Provides Quantitative Measurement: Enables evaluation based on wear length measurement (or potentially mass loss using the integrated balance).
Suitable for Soles and Materials: Applicable for testing both finished soles and samples of sole materials.
Includes Integrated Balance: The presence of a balance facilitates wear assessment by mass loss if required by the test method or user preference.
Product Features:
Rotary grinding head with a specified grinding wheel.
Mechanism for applying a vertical load (pressure) to the sample via the grinding head.
Sample holder to securely position the sole or sole piece for testing.
Motor and control system to rotate the grinding wheel at a controlled speed (191 ± 5 r/min, adjustable).
Timer to control the duration of the test (20 minutes, adjustable).
Detailed specifications for the grinding wheel, ensuring a standardized abrasive surface.
Integrated balance for weighing samples (5000g range, 0.5g accuracy).
Likely includes a counter to track the number of rotations.
Designed for operation within specific temperature and humidity ranges.
Robust construction suitable for repeated use in a laboratory or quality control environment.
Method for measuring wear length (as mentioned in the introduction) - this could be a manual measurement using a scale after the test or an integrated measurement system, although not explicitly detailed.
Technical specifications:
Performance: Accurate weighing, stability, good repeatability, the use of environmental requirements: at a specific temperature （23±2℃）， measuring the weight of the material and water
Speed: （191±5）r/min（adjustable）
Load: 500g（5g-500g optional）
Test time: 20 minutes （adjustable）
Grinding wheel: 20±0.1 diameter 4±0.1mm thick, T12 steel grinding wheel, with 72 teeth, tooth Angle 90°±5°, tip width 0.2±0.05mm, tip roughness Ra=3.2um, hardness HRC³55, coaxiality 0.03mm
Balance range: 5000g, accuracy: 0.5g
Volume: 560×510×830mm
Weight: 70kg
Power supply: AC220V,10A
Send product request
Other supplier products
 |
Automotive Wires Dynamic Bending Tester | Standard ISO 6722: Road vehicles – Flexible cables for wiring harnesses. SAE J1128: Low-voltage primary cable for automotive applicatio... |
 |
Automobile seat belt fixed point test bench | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtures and headrests strength requirements and test me... |
 |
Paper Gypsum Board Fire Stability Tester | Introduction gypsum board fire stability tester, also known as paper gypsum board fire stability tester, is used to determine the fire stability o... |
 |
Horizontal paper tensile strength testing machine | Product Introduction: G103C horizontal tensile strength tester adopts paper tensile strength software, which is a paper resistance tester for meas... |
 |
High Impact Marine Tank Cleaning Machine，Oil Tank Cleaning Machine | Working Principle: STD 45 tank washer drives the impeller through cleaning liquid and drives the transmission mechanism. The speed of rotation is ... |
Same products
 |
Resistance Loop Bands | Seller: Shanghai Pisces Sporting & Leisure Products Co., Ltd | Resistance Loop Bandsare versatile fitness tools designed to enhance muscle strength, flexibility... |
 |
Stainless Steel Flux Cored Welding Wire E308T1-1 E308HT1-1 E308LT1-1 Gas Shielded FCAW Wire for 304 Stainless Steel Welding | Seller: 863048 | Product Description stainless steel flux cored wire E308T1-1 E308HT1-1 E308LT1-1,FCAW stainless ... |
 |
E317LT1-1 Flux Cored Wire CO2 Stainless Steel 70% Flux Content 1.0/1.2/1.6mm Diameter OEM Customized 1200C Melting Point | Seller: 863048 | XUNZHUO STAINLESS STEEL CORED WELDING WIRE E317LT1-1 CLASSIFICATION: There are ones with diamet... |
 |
Mini Jewelry Laser Repair System – 60W to 400W Precision Welding | Seller: Beijing JCZ Technology Co., Ltd | The Mini Jewelry Laser Welding Machineis an advanced mini laser welding system engineered for pre... |
 |
Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal | Seller: Beijing JCZ Technology Co., Ltd | TheHCP-M SeriesBackpack Laser Cleaning Machinefeatures a compact pulsed fiber laser system, desig... |
