IBC cleaning systems,ibc cleaning equipment,high pressure ibc washer
Model Semi-automatic IBC tote washer Spray angle 360° Material stainless steel Max. Pressure 150 bar Voltage 380V (or on request) Voltage of IBC tote cleaning head 24V DC Temperature 0-60°C Configuration high pressure pump and motor, water tank , filter, control box, ibc cleaning nozzle, hose, etc Application Rinsing and cleaning of IBC tote Design feature: MD series are driven by the motor with external gear and provides 360° impact indexed coverage for the cleaning of the inside of tanks and process vessels. 1. Using dynamic seal at leakage point to reduce leakage,only 3% leakage, thus save cleaning fluid. 2. The nozzle have a unique steady flow design which canmake the jet be more concentrated, greater impact. 3. Driven by external motor, thereby reducing the pressureloss of water flow, resulting in higher water impact. 4. Compact build ideal for small openings Application: Model MD series is a highly versatile machine and isapplicable in most all types of tanks for process,storage, and transportation. It can be used as a portableunit or permanently mounted. Product photo of ibc cleaning system:
Send product request
Other supplier products
 |
Geomembrane Hydrostatic and Permeability Tester-QINSUN | Scope of application: It is used to test the hydrostatic pressure resistance and permeability coefficient of nonwoven composite geotextile （one cl... |
 |
Coated fabric flexing resistance testing machine | Instrument Purpose The instrument tests coated fabric strips by winding them into cylindrical samples between two rotating cylinders. One cylinder... |
 |
Box Compression Tester | Standard operating mode: 1.Carton strength test: can measure the maximum pressure resistance and displacement of the box; 2. Carton setting tes... |
 |
Car seat belt locking performance tester | Applicable standards: Automotive seat belt locking performance tester mainly meets the following national or industry standards: GB 14166-2013Sea... |
 |
Automobile Wire Cross-linking Test Device | Applicable Standards: SAE J1128 - 2005 and other standards Main Parameters: 1. Test rod: Φ6mm, 300mm in length 2. Hot plate specification... |
Same products
 |
Seat Bumping and Creep Test Bench | Seller: Standard International Group (HK) Limited | This test bench is used for simulating the car seat bumping and creep situation when a car is run... |
 |
Automobile seat belt fixed point test bench | Seller: Standard International Group (HK) Limited | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur... |
 |
Impact strength tester for car seat headrest | Seller: Standard International Group (HK) Limited | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi... |
 |
Impact strength tester for car seat launching headrest | Seller: Standard International Group (HK) Limited | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w... |
 |
Automobile Headrest Strength Tester | Seller: Standard International Group (HK) Limited | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me... |
