Computer controlled electronic universal testing machine
Product Introduction
1. Meet the standard "GB/6344-2018 soft foam polymer tensile strength and elongation at break determination, GB/T6669-2008 foam polymer material compression permanent deformation determination, GB/T10807 soft foam polymer material compression hardness test method, GB/T10808 Soft foam tear performance test method ".
2. Application: Determination of stretch, tear, elongation at break, collapsibility hardness and compression permanent deformation of polyurethane foam.
3. Supply model: Imported servo motor with double precision ball screw.
4. Test results: It can measure the tensile strength, compressive strength, elongation at break, elastic modulus, stress, strain and other parameters of the material.
5. Force value measurement: equipped with high-precision domestic sensor, full range linear, wider test range.
6. Curve mode: Tensile: force-elongation, stress-strain, strength-time; Force-time, extension-time, strain-time. Compression: force-deformation, stress-strain, strength-time, force-time, deformation-time, strain-time.
7. Local amplification test: Any section on the curve can be used for regional amplification analysis and reduction.
8. Data analysis: The test data on the curve can be selected and analyzed at will.
9. Automatic storage: test conditions, test results, test curves, data and a group of sample results are selected to be valid, and can be continuously tested and stored, called at any time;
10. Report selection print: you can select different report formats according to user needs, you can use EXCEL or Word or PDF to directly view the report or select different curve data comparison forms.
11. Breaking stop function: the sample can automatically stop at the moment of breaking.
12. Automatic protection: automatic overload, over-current, over-voltage, under-voltage, over-temperature, upper and lower limit protection.
13. Control function: constant test force, constant deformation control mode, automatic return function.
14. Manual control: In addition to automatic control, there is a Chinese liquid crystal display manual control box, which can manually operate the beam up and down, making it more convenient to move the beam position control.
15. Zero clearing: load, deformation, displacement measurement can be manually or automatically zero.
Standards
GB/T 16491
CN2674430Y
Performance parameters
- Testing machine grade: 0.5
- Displacement measurement range: 0——999mm
- Maximum test force: 1kN——20kN
- Resolution: 0.001mm
- Effective force measurement range: 0.4%——100%FS(internal and external ungraded)
- Displacement accuracy: ±0.5%
- Resolution: 1/300000
- Beam deformation measurement accuracy: ±0.5%
- High precision sensor accuracy: ±0.5%
- Beam deformation measurement range: 600mm
- Load measurement accuracy: ±0.5%
- Effective test width: 900mm
- Test speed adjustment range: 0.05——500mm/min(stepless speed regulation)
- Speed accuracy: ±0.5%
- Beam maximum effective travel: 1200mm
- Control range of uniform test force rate and uniform deformation rate: 0.01%——10%FS/S
- Control error of uniform test force rate and uniform deformation rate: 0.5%
- Constant test force, constant deformation control range: 0.5%——100%FS
- Constant test force, constant deformation control error: less than 10%FS is ±1% of the set value; Greater than 10%FS is ±0.1% of the set value
- Power supply: AC220V 0.5KW
Send product request
Other supplier products
 |
New warm body dummy tester | Product Description In addition to heat dissipation to the surrounding environment through conduction, convection and radiation, the human body al... |
 |
Nissan 4-Station Abrasion Tester for Multi-Material Durability Tester-QINSUN | Standard ASTM D3884(Standard Guide for Abrasion Resistance of Textile Fabrics) ISO 5470-1(Rubber- or Plastics-Coated Fabrics - Abrasion Resistanc... |
 |
Parts Valves Tube Cleaning | A robot system to clean parts, valves and tubes. By high pressure water tools together the intelligent programming, the system can make the clean ... |
 |
Tumble dryer | Scope of Application Used for the drying process in theTextile Testing - Home Laundering and Drying Proceduresstandard and other textile testing... |
 |
Wyzenbeek or Oscillatory Abrasion Tester-QINSUN | Product introduction: Wyzenbeek wear resistance tester, also known as Oscillatory wear resistance tester, is used to test the wear resistance of f... |
Same products
 |
Resistance Loop Bands | Seller: Shanghai Pisces Sporting & Leisure Products Co., Ltd | Resistance Loop Bandsare versatile fitness tools designed to enhance muscle strength, flexibility... |
 |
Stainless Steel Flux Cored Welding Wire E308T1-1 E308HT1-1 E308LT1-1 Gas Shielded FCAW Wire for 304 Stainless Steel Welding | Seller: 863048 | Product Description stainless steel flux cored wire E308T1-1 E308HT1-1 E308LT1-1,FCAW stainless ... |
 |
E317LT1-1 Flux Cored Wire CO2 Stainless Steel 70% Flux Content 1.0/1.2/1.6mm Diameter OEM Customized 1200C Melting Point | Seller: 863048 | XUNZHUO STAINLESS STEEL CORED WELDING WIRE E317LT1-1 CLASSIFICATION: There are ones with diamet... |
 |
Mini Jewelry Laser Repair System – 60W to 400W Precision Welding | Seller: Beijing JCZ Technology Co., Ltd | The Mini Jewelry Laser Welding Machineis an advanced mini laser welding system engineered for pre... |
 |
Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal | Seller: Beijing JCZ Technology Co., Ltd | TheHCP-M SeriesBackpack Laser Cleaning Machinefeatures a compact pulsed fiber laser system, desig... |
