Computer controlled electronic universal testing machine
Product Introduction
1. Meet the standard "GB/6344-2018 soft foam polymer tensile strength and elongation at break determination, GB/T6669-2008 foam polymer material compression permanent deformation determination, GB/T10807 soft foam polymer material compression hardness test method, GB/T10808 Soft foam tear performance test method ".
2. Application: Determination of stretch, tear, elongation at break, collapsibility hardness and compression permanent deformation of polyurethane foam.
3. Supply model: Imported servo motor with double precision ball screw.
4. Test results: It can measure the tensile strength, compressive strength, elongation at break, elastic modulus, stress, strain and other parameters of the material.
5. Force value measurement: equipped with high-precision domestic sensor, full range linear, wider test range.
6. Curve mode: Tensile: force-elongation, stress-strain, strength-time; Force-time, extension-time, strain-time. Compression: force-deformation, stress-strain, strength-time, force-time, deformation-time, strain-time.
7. Local amplification test: Any section on the curve can be used for regional amplification analysis and reduction.
8. Data analysis: The test data on the curve can be selected and analyzed at will.
9. Automatic storage: test conditions, test results, test curves, data and a group of sample results are selected to be valid, and can be continuously tested and stored, called at any time;
10. Report selection print: you can select different report formats according to user needs, you can use EXCEL or Word or PDF to directly view the report or select different curve data comparison forms.
11. Breaking stop function: the sample can automatically stop at the moment of breaking.
12. Automatic protection: automatic overload, over-current, over-voltage, under-voltage, over-temperature, upper and lower limit protection.
13. Control function: constant test force, constant deformation control mode, automatic return function.
14. Manual control: In addition to automatic control, there is a Chinese liquid crystal display manual control box, which can manually operate the beam up and down, making it more convenient to move the beam position control.
15. Zero clearing: load, deformation, displacement measurement can be manually or automatically zero.
Standards
GB/T 16491
CN2674430Y
Performance parameters
- Testing machine grade: 0.5
- Displacement measurement range: 0——999mm
- Maximum test force: 1kN——20kN
- Resolution: 0.001mm
- Effective force measurement range: 0.4%——100%FS(internal and external ungraded)
- Displacement accuracy: ±0.5%
- Resolution: 1/300000
- Beam deformation measurement accuracy: ±0.5%
- High precision sensor accuracy: ±0.5%
- Beam deformation measurement range: 600mm
- Load measurement accuracy: ±0.5%
- Effective test width: 900mm
- Test speed adjustment range: 0.05——500mm/min(stepless speed regulation)
- Speed accuracy: ±0.5%
- Beam maximum effective travel: 1200mm
- Control range of uniform test force rate and uniform deformation rate: 0.01%——10%FS/S
- Control error of uniform test force rate and uniform deformation rate: 0.5%
- Constant test force, constant deformation control range: 0.5%——100%FS
- Constant test force, constant deformation control error: less than 10%FS is ±1% of the set value; Greater than 10%FS is ±0.1% of the set value
- Power supply: AC220V 0.5KW
在线联系供应商
Other supplier products
 |
Vibration and Abrasion Resistance Tester for Automotive Wire-to-Wire | Standard ISO 6722: Road vehicles – Flexible cables for wiring harnesses SAE J1128: Low-voltage primary cable for automotive application... |
 |
Cable extrusion tester | Applicable Standards The tester adheres to international standards for cable mechanical testing, including: ISO 6722-1(Road vehicles – El... |
 |
Heat insulation efficiency limit test furnace | Product Introduction: Heat insulation efficiency and fire resistance test furnace of steel structure fire retardant coatings is a special instrume... |
 |
Tipping Frames | STD-5D Adjustable for different drum sizes Compatible with TONSON valves for flow control Pneumatic dumping (saves time and labor) Drum mouth h... |
 |
Water injection counterweight dummy | Product Introduction This counterweight dummy can be filled with water, the torso and the bottom are separated, independently filled with water o... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
