.

Bentonite waterproof blanket permeability tester

Scope of application:

Used to determine the permeability coefficient of bentonite waterproof blanket under specified pressure and time conditions. The bentonite waterproof blanket will produce small seepage under a certain pressure difference, and the permeability coefficient can be calculated by measuring the seepage flow and the thick

ness of the sample within a certain time under the specified hydraulic pressure difference.

Meet the standard:

SL/T , JG/T 193- Appendix A-2006, GB/T 35470- Appendix B-2017, JC/T 2054- Appendix A-2020, ASTM

D5887-1999.etc.

Instrument features:

Using 1+2 mode, it can provide a single station machine and a 2 station auxiliary machine;

The table is made of stainless steel, clean appearance, good water resistance, no rust;

Test through pressure loading, no need to connect to electricity, safe and reliable;

Adopt imported high-precision pressure regulator, the pressure regulation is accurate and stable, to ensure the experimental requirements;

The loading circuit design is reasonable, and the valve switch adjustment is simple;

The measurement accuracy was improved to 0.05m1.

The integrated vacuum device makes it easier to vacuum during sample preparation and testing;

Add negative pressure degassing device, so that the water entering the sample is degassing water, the test result is more accurate; :

The test chamber can be moved to make the operation more flexible;

The main use of two-position valve, instrument operation is simpler;

The automatic test interface is reserved, which can be more convenient to obtain pressure reading and automatic measurement by adding an automatic test device.

Technical parameters:

Instrument type table

Sample size Ø100 mm can be customized; Maximum thickness 50 mm

Confining pressure adjustment range 0——600 kPa(87 psi), continuously adjustable

End pressure adjustment range 0——550 kPa(79 psi), continuously adjustable

Pressure regulation mode

Confining pressure, upstream and downstream pressure regulation are equipped with independent fine valves, adjustment accuracy of 1KPA(0.1 psi), the pressure can be adjusted respectively upstream and downstream pressure can be adjusted at the same time

Pressure display Confining pressure, upstream and downstream switching display, display accuracy 1KP permeability measurement display mode ruler read, display accuracy :0.05ml

Burette/ring maximum volume 25/400 ml

Overall dimensions of instrument

Main machine: W x H x D =600x860x180(Support length auxiliary machine: W x H x D =900x860x180(Support length whole machine weight about 380kg(main machine 180kg, auxiliary machine 200kg)


Send product request

To: Standard International Group (HK) Limited
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Rail transit car wire abrasion testing machine
Rail transit car wire abrasion testing machine Applicable standards: GBIT 12528-2008 Standard for cables for rail transit vehicles with a rated AC voltage of 3KV and below Main parameters:...
 Fabric horizontal burning tester
Fabric horizontal burning tester Standard QB/T 2729: Leather – Horizontal flammability test for physical and mechanical properties. ASTM D5132: Horizontal burning rate of p...
Manual Crockmeter for Color Fastness Tester-QINSUN
Manual Crockmeter for Color Fastness Tester-QINSUN Standard AATCC 8(Colorfastness to Crocking) ISO 105-X12(Textiles - Tests for Colour Fastness - Part X12: Colour Fastness to Rubbing) ASTM D505...
Seat Ingress/Egress Simulation Tester
Seat Ingress/Egress Simulation Tester Standard ISO 16840(Wheelchair Seating - Test Methods for Determining Mechanical Properties) FMVSS 207(Federal Motor Vehicle Safety Standard for...
Carton Clamp Tester
Carton Clamp Tester Product introduction:   This machine mainly aims at the ability of the product to withstand the pressure of lead from the car when the product ...
All supplier products

Same products

Blanket Flammability Test Machine
Blanket Flammability Test Machine Seller: Standard Groups Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ...
High Temperature Oxygen Index Tester
High Temperature Oxygen Index Tester Seller: Standard Groups The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125...
Limiting Oxygen Index Tester
Limiting Oxygen Index Tester Seller: Standard Groups The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb...
Vertical Flammability Tester
Vertical Flammability Tester Seller: Standard Groups Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe...
45 Degree Flammability Tester
45 Degree Flammability Tester Seller: Standard Groups Application 45 Degree Flammability Tester is used to determine the burning characteristics of te...