PV Module Ammonia Resistance Test Chamber
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Applications
The Photovoltaic Ammonia Test Chamber is a testing device designed to evaluate the corrosion resistance of photovoltaic modules in ammonia environments, ensuring their long-term stable operation in harsh conditions such as industrial or agricultural settings.
Standards
IEC 62716: Photovoltaic (PV) modules—Ammonia corrosion testing (The core standard for this equipment).
IEC 61701: Salt mist corrosion testing of photovoltaic (PV) modules.
IEC 60068-2-52: Environmental testing—Part 2-52: Tests—Test Kb: Salt mist, cyclic (sodium chloride solution).
GB/T 2423.17 / GB/T 2423.18: Environmental testing for electric and electronic products—Salt mist testing methods.
IEC Draft 82/722/CDV: Specific requirements for integrated salt mist and ammonia gas exposure sequences.
Features
This equipment can independently perform all test procedures required by IEC 61701 and IEC Draft Standard 82/722/CDV. Specifically, spray testing at severity levels 1-6. damp heat storage, standard atmospheric environment testing, and sample cleaning phases are all completed within the NaCl corrosion chamber. Ammonia spray testing, damp heat storage, spray washing, and drying can all be performed within the NH3 corrosion chamber.
Parameters
| Item | Specifications |
|---|---|
| NH₃ Concentration | 0–10000 ppm (adjustable) |
| Ammonia Concentration Resolution | ±1 ppm |
| Temperature Control Range | 15°C ~ 70°C |
| Temperature Fluctuation | ≤ ±0.5°C |
| Temperature Deviation | ≤ ±1.0°C |
| Temperature Uniformity | ≤ ±2°C |
| Humidity Control Range | 40% ~ 100% RH (adjustable) |
| Humidity Deviation | ≤ ±2% RH |
| Humidity Uniformity | ≤ ±3% RH |
| Test Accuracy | ±2% |
Accessories
1.Ammonia Gas Dosing System: Precision mass flow controllers for accurate gas injection.
2.Ammonia Concentration Sensor: High-precision electrochemical or laser-based gas detectors.
3.Specimen Racks: Non-reactive, adjustable holders designed to support full-sized PV modules at standard angles.
4.Exhaust Scrubber Unit: A chemical neutralization system to safely treat ammonia-laden air.
5.NaCl Spray Module: Integrated nozzles and reservoir for salt mist phases (Standard Severity 1-6).
6.Deionized Water Rinse: Internal spray bars for automated sample cleaning between test stages.
Test Procedures
1.Preparation
Sample Preparation: Clean samples and secure them on the sample rack, ensuring they do not touch each other.
Solution Preparation: Prepare a 5% NaCl solution (pH 6.5-7.2) according to the standard.
2.Power-On Test
Power Connection: Connect the power supply and turn on the main switch.
3. Test Operation
Start Test: After confirming parameters are correct, press the “Start” button.
Spray Inspection: Once temperature is reached, the spray system will automatically activate. Observe spray uniformity.
4. Test Completion
Shutdown Procedure: Turn off the spray switch. Allow cooling to below 40°C before disconnecting power.
Sample Removal: Remove specimens for corrosion assessment.
Send product request
Other supplier products
 |
Humidity heat chamber for pv modules | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Damp Heat Test Chamber is suitable for: Damp-heat performance testing of ... |
 |
Flex Durability Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Flex Durability Tester is suitable for testing the rub resistance of various flexible f... |
 |
Laboratory Test Dummy for EV Battery Performance and Safety | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application This dummy is suitable for the following applications: Vibration reliability ... |
 |
Automotive cable transmission efficiency test system | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application This tester is applicable for efficiency testing of various vehicle control ca... |
 |
Needle Flame Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard GB/T 5169.5: Electrical & Electronic Equipment – Needle Flame Test Meth... |
Same products
 |
Multi-Purpose Friction and Wear Tester | Seller: Standard Groups | The Multi-Purpose Friction and Wear Tester is a laboratory testing system designed to evaluate fr... |
 |
Gas Jet Erosion Rig/Jet Erosion Test Rig | Seller: Standard Groups | The Gas Jet Erosion Rig is a laboratory testing system designed to evaluate erosion wear behavior... |
 |
Twist Compression Tester | Seller: Standard Groups | The Twist Compression Tester is a laboratory tribology instrument designed to evaluate friction b... |
 |
Belt Abrasion Tester ASTM G132 | Seller: Standard Groups | The Belt Abrasion Tester is a laboratory testing instrument designed to evaluate the abrasive wea... |
 |
Multi-Axis Tribometer ASTM G119 | Seller: Standard Groups | The Multi-Axis Tribometer is a versatile tribological testing device for studying friction and we... |
