Nissan Scratch Testing Equipment
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
You can use this tester to:
Assess scratch resistance of automotive interior plastic parts, including dashboards, door panels, and trim.
Evaluate exterior coatings, painted surfaces, and decorative panels for abrasion and scratch performance.
Conduct quality control and R&D verification for automotive paints and surface treatments.
Support material selection and comparative testing for OEMs (Honda, Nissan, Hyundai) and Tier 1 suppliers.
Test plastics, coatings, and decorative surfaces in laboratories, third-party testing centers, and manufacturing QA.
Standard
ASTM D7027(Standard Test Method for Scratch Resistance of Polymeric Coatings and Plastics)
ISO 1518(Paints and Varnishes — Determination of Scratch Resistance)
JIS K 5600-5-6(Scratch Hardness Test for Coatings)
Technical Parameters
| Parameter | Specification |
|---|---|
| Load Range | 0.5–50 N (±0.01 N accuracy) |
| Speed Range | 1–200 mm/s (±0.1 mm/s accuracy) |
| Scratch Length | 5–100 mm (adjustable) |
| Microscope Magnification | 10–200x (4K resolution) |
| Dimensions (L×W×H) | 800×600×1.200 mm |
| Weight | 150 kg |
| Operating Environment | 15–35°C, ≤85% RH (non-condensing) |
| Power Supply | 220V/110V AC, 50/60Hz, 800W |
Accessories
Scratch Heads:
5× diamond indenter tips (Rockwell C geometry).
10× spherical stylus (1–10 mm radius).
Calibration Tools:
Load cell verifier, scratch depth gauge, and NIST-traceable certificate.
Sample Fixtures:
Pneumatic clamps for flat/curved specimens, vacuum chuck for thin films.
Software Suite:
AI analytics platform with scratch simulation, ERP integration, and 8-language report generator.
Safety Bundle:
Emergency stop, acoustic enclosure, and fume extraction port.
Ideal For:
Automotive OEMs (paint, trim, and interior coating durability)
Electronics manufacturers (screen protectors, polymer casing testing)
Medical device makers (biocompatible coating scratch resistance)
Research universities (advanced material innovation)
Test Procedures
Prepare test specimens of the required size and clean surfaces.
Mount specimens securely using double-stick tape or clamp bar.
Install scratch head and confirm weight or perform calibration.
Adjust test arm to neutral balance to ensure only head weight is applied.
Set stroke length and scratch speed according to relevant standard.
Start the test using dual-hand activation switch.
Perform multiple scratch tests on different locations as required.
Upon completion, remove specimen and visually evaluate scratch depth, continuity, and visibility.
Record results according to standard requirements.
Maintenance Information
Inspect scratch heads regularly for wear or deformation; replace when necessary.
Keep test platform and arm clean to prevent residue affecting results.
Check screws, fasteners, and mechanical joints periodically to ensure stability.
Store the tester in a dry environment to preserve precision bearings and surface finish.
Verify test arm balance and calibration weights before each test session.
Send product request
Other supplier products
 |
Particle Abrasion Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Particle Abrasion Tester (Q-4D) is a precision instrument designed to measure the wear ... |
 |
Battery Overheating and Ignition Combustion Tester ASTM Standard | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) UN 38.3 – Lithium Batteries Transport Testing (2) UL 16... |
 |
Luer conical joint multi-function tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Luer Conical Joint Multi-Function Tester is a precision instrument designed to evaluate... |
 |
Suture Needle Penetration and Bending Strength Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Suture Needle Penetration and Bending Strength Tester is a device used to test the pene... |
 |
ISO 6943 elastic fatigue resistance tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Application Elastic Tape Fatigue Testing Machineis used to determine its rep... |
Same products
 |
MMA-120 Handheld Arc Welder | Seller: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
