Nissan Scratch Testing Equipment

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Application

You can use this tester to:

Assess scratch resistance of automotive interior plastic parts, including dashboards, door panels, and trim.

Evaluate exterior coatings, painted surfaces, and decorative panels for abrasion and scratch performance.

Conduct quality control and R&D verification for automotive paints and surface treatments.

Support material selection and comparative testing for OEMs (Honda, Nissan, Hyundai) and Tier 1 suppliers.

Test plastics, coatings, and decorative surfaces in laboratories, third-party testing centers, and manufacturing QA.

Standard

ASTM D7027(Standard Test Method for Scratch Resistance of Polymeric Coatings and Plastics)

ISO 1518(Paints and Varnishes — Determination of Scratch Resistance)

JIS K 5600-5-6(Scratch Hardness Test for Coatings)

Technical Parameters

Parameter	Specification
Load Range	0.5–50 N (±0.01 N accuracy)
Speed Range	1–200 mm/s (±0.1 mm/s accuracy)
Scratch Length	5–100 mm (adjustable)
Microscope Magnification	10–200x (4K resolution)
Dimensions (L×W×H)	800×600×1.200 mm
Weight	150 kg
Operating Environment	15–35°C, ≤85% RH (non-condensing)
Power Supply	220V/110V AC, 50/60Hz, 800W

Accessories

Scratch Heads:

5× diamond indenter tips (Rockwell C geometry).

10× spherical stylus (1–10 mm radius).

Calibration Tools:

Load cell verifier, scratch depth gauge, and NIST-traceable certificate.

Sample Fixtures:

Pneumatic clamps for flat/curved specimens, vacuum chuck for thin films.

Software Suite:

AI analytics platform with scratch simulation, ERP integration, and 8-language report generator.

Safety Bundle:

Emergency stop, acoustic enclosure, and fume extraction port.

Ideal For:

Automotive OEMs (paint, trim, and interior coating durability)

Electronics manufacturers (screen protectors, polymer casing testing)

Medical device makers (biocompatible coating scratch resistance)

Research universities (advanced material innovation)

Test Procedures

Prepare test specimens of the required size and clean surfaces.

Mount specimens securely using double-stick tape or clamp bar.

Install scratch head and confirm weight or perform calibration.

Adjust test arm to neutral balance to ensure only head weight is applied.

Set stroke length and scratch speed according to relevant standard.

Start the test using dual-hand activation switch.

Perform multiple scratch tests on different locations as required.

Upon completion, remove specimen and visually evaluate scratch depth, continuity, and visibility.

Record results according to standard requirements.

Maintenance Information

Inspect scratch heads regularly for wear or deformation; replace when necessary.

Keep test platform and arm clean to prevent residue affecting results.

Check screws, fasteners, and mechanical joints periodically to ensure stability.

Store the tester in a dry environment to preserve precision bearings and surface finish.

Verify test arm balance and calibration weights before each test session.

Другие товары поставщика

	Fully Automatic Continuous Flow Reaction Calorimeter	Whats/App: +86 156 1874 6768 Web: standard-groups.com This product is a highly automated and customizable continuous flow reaction thermal analys...
	NEXGEN Aviation Fuel Burner，Jet fuel combustion test equipment	Whats/App: +86 156 1874 6768 Web: standard-groups.com The NEXGEN Aviation Fuel Burner is an FAA-approved, next-generation aircraft fuel combustio...
	Compression Tester STD - FB3 - A	Whats/App: +86 156 1874 6768 Web: standard-groups.com TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed...
	AATCC KMS-M6 Washer, KMS-M6D Dryer	Whats/App: +86 156 1874 6768 Web: standard-groups.com The AATCC KMS-M6 Washer and KMS-M6D Dryer are precision textile testing instruments designe...
	Alcohol abrasion tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Alcohol Abrasion Tester is designed for evaluating the wear and friction resistance of ...

Все товары поставщика

Похожие товары

	ER4047 Aluminum Mig Welding Wire	Продавец: 868776	Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing reliable welding material...
	ER4043 Silicon Aluminum Welding Wire	Продавец: 868776	Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate...
	Choosing the Right Equipment for Heavy-Duty Cleaning	Продавец: Taizhou Feike Mechanical Technology Co., Ltd.	FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve...
	ER4043 Silicon Aluminum Welding Wire	Продавец: 868776	Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin...
	Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением	Продавец: Shandong HUASU Plastic Technology Co.,Ltd.	Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ...