Nissan Scratch Testing Equipment
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
You can use this tester to:
Assess scratch resistance of automotive interior plastic parts, including dashboards, door panels, and trim.
Evaluate exterior coatings, painted surfaces, and decorative panels for abrasion and scratch performance.
Conduct quality control and R&D verification for automotive paints and surface treatments.
Support material selection and comparative testing for OEMs (Honda, Nissan, Hyundai) and Tier 1 suppliers.
Test plastics, coatings, and decorative surfaces in laboratories, third-party testing centers, and manufacturing QA.
Standard
ASTM D7027(Standard Test Method for Scratch Resistance of Polymeric Coatings and Plastics)
ISO 1518(Paints and Varnishes — Determination of Scratch Resistance)
JIS K 5600-5-6(Scratch Hardness Test for Coatings)
Technical Parameters
| Parameter | Specification |
|---|---|
| Load Range | 0.5–50 N (±0.01 N accuracy) |
| Speed Range | 1–200 mm/s (±0.1 mm/s accuracy) |
| Scratch Length | 5–100 mm (adjustable) |
| Microscope Magnification | 10–200x (4K resolution) |
| Dimensions (L×W×H) | 800×600×1.200 mm |
| Weight | 150 kg |
| Operating Environment | 15–35°C, ≤85% RH (non-condensing) |
| Power Supply | 220V/110V AC, 50/60Hz, 800W |
Accessories
Scratch Heads:
5× diamond indenter tips (Rockwell C geometry).
10× spherical stylus (1–10 mm radius).
Calibration Tools:
Load cell verifier, scratch depth gauge, and NIST-traceable certificate.
Sample Fixtures:
Pneumatic clamps for flat/curved specimens, vacuum chuck for thin films.
Software Suite:
AI analytics platform with scratch simulation, ERP integration, and 8-language report generator.
Safety Bundle:
Emergency stop, acoustic enclosure, and fume extraction port.
Ideal For:
Automotive OEMs (paint, trim, and interior coating durability)
Electronics manufacturers (screen protectors, polymer casing testing)
Medical device makers (biocompatible coating scratch resistance)
Research universities (advanced material innovation)
Test Procedures
Prepare test specimens of the required size and clean surfaces.
Mount specimens securely using double-stick tape or clamp bar.
Install scratch head and confirm weight or perform calibration.
Adjust test arm to neutral balance to ensure only head weight is applied.
Set stroke length and scratch speed according to relevant standard.
Start the test using dual-hand activation switch.
Perform multiple scratch tests on different locations as required.
Upon completion, remove specimen and visually evaluate scratch depth, continuity, and visibility.
Record results according to standard requirements.
Maintenance Information
Inspect scratch heads regularly for wear or deformation; replace when necessary.
Keep test platform and arm clean to prevent residue affecting results.
Check screws, fasteners, and mechanical joints periodically to ensure stability.
Store the tester in a dry environment to preserve precision bearings and surface finish.
Verify test arm balance and calibration weights before each test session.
在线联系供应商
Other supplier products
 |
Metal Wire Wrap Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Metal Wire Wrap Tester is designed to evaluate the ductility and winding performance of... |
 |
Safety Helmet Anti-static Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Safety Helmet Anti-static Tester is designed to evaluate the antistatic performance of ... |
 |
EN 136 / EN 137 High Temperature Half Mannequin | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The mannequin can be used as a test carrier in accordance with or in support of ... |
 |
50th Percentile Male Crash Test Dummy (Standing) | Whats/App: +86 156 1874 6768 Web: standard-groups.com The 50th Percentile Male Crash Test Dummy (Standing) is a biomechanical surrogate designed ... |
 |
Wire Repeated Bending Cycle Testing Machine UL Standard | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) GB/T 238-2013 – Metal Material Wire Repeated Bending Tes... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
