Laboratory Fire Smoke and Toxic Gas Test Equipment
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
The system complies with the following standards and test methods:
(1) GB/T 19666 – General Rules for Flame-Retardant and Fire-Resistant Wires, Cables or Optical Cables
(2) EN 50305 – Railway Applications – Test Methods for Fire Behaviour of Electric Cables
(3) BS 6853 Annex B – Code of Practice for Fire Precautions in the Design and Construction of Passenger Carrying Trains
(4) ISO 19700 – Controlled Equivalence Ratio Method for the Determination of Toxic Product Yields in Fire Effluents (Steady-State Tube Furnace Method)
(5)ASTM E1678
(6)NFPA 269
Parameters
| Item | Specification |
|---|---|
| Tube furnace heating length | 600 mm |
| Temperature range | 0–1100 °C |
| Temperature accuracy | ±0.1 °C |
| Quartz tube | Heat-resistant quartz, thickness ≥ 2 mm |
| SO₂ measurement range | 0–1000 ppm |
| SO₂ resolution | 1 ppm |
| SO₂ accuracy | ±30 ppm |
| NOₓ measurement range | 0–3000 ppm |
| NOₓ resolution | 1 ppm |
| NOₓ accuracy | ±30 ppm |
| Gas sampling bag | PTFE-coated, 80 L capacity, with imported manual sampler |
| CO measurement range | 0–10 % |
| CO resolution | 0.01 % |
| CO accuracy | Absolute ±0.1 % or relative ±3 % |
| CO₂ measurement range | 0–20 % |
| CO₂ resolution | 0.01 % |
| CO₂ accuracy | Absolute ±0.2 % or relative ±3 % |
| Spectral analysis device | Spectrometer at 500 nm wavelength, membrane thickness 10 mm |
| Absorption solution | 0.1 N NaOH |
| Titration reagents | Picric acid aqueous solution (3 g/dm³) and sodium carbonate aqueous solution (50 g/dm³) |
Features
Sealed chamber design with the smoke generation system installed internally, providing stable operation and effective protection of core components
Large observation window allowing clear visual monitoring of test status and specimen movement
Integrated industrial design with panel-mounted structure, offering intuitive operation and ergonomic user interface
Tube furnace protected by perforated outer housing to enhance heat dissipation and ensure uniform temperature rise to the target value
High-temperature K-type thermocouple for accurate measurement of specimen zone temperature
Ceramic combustion boat driven by strong magnetic coupling and transmission mechanism for stable and repeatable specimen delivery into the furnace core
Precision lead-screw transmission system enabling accurate positioning and reliable sealing of the quartz tube, reducing the risk of damage due to manual operation
Dual filtration columns filled with activated carbon and color-changing silica gel for effective carrier gas purification and drying
Branded computer with dedicated control software for automatic test process control
Software-based temperature regulation and stabilization with real-time curve recording, automatic data display, storage, and report generation
Accessories
(1) Heat-resistant quartz tube
(2) Ceramic combustion boat
(3) PTFE-coated gas sampling bag (80 L)
(4) Activated carbon filter column
(5) Color-changing silica gel filter column
(6) K-type thermocouple
(7) Dedicated control software and industrial computer
Test Procedures
1. Pre-Test Preparation
Ensure the tester is installed in a well-ventilated laboratory environment. Verify that the tube furnace, quartz tube, and filtration system are clean and properly assembled. Check that the absorption solution (0.1 N NaOH) and titration reagents are prepared according to specified concentrations. Confirm normal operation of the temperature control system, gas analysis instruments, and data acquisition software.
2. Specimen Loading
Place the prepared test specimen into the ceramic combustion boat. Using the magnetic drive and transmission mechanism, steadily convey the boat into the center of the tube furnace. The lead-screw positioning system ensures accurate alignment and reliable sealing at the quartz tube interface, minimizing gas leakage during the test.
3. Heating and Smoke Generation
Set the target temperature according to the selected standard. The furnace temperature is automatically controlled by the software, with uniform heating achieved through regulated power output. As the specimen undergoes thermal decomposition or combustion, the generated smoke is carried by a controlled gas flow toward the sampling and absorption system.
4. Gas Collection and Analysis
The combustion gases are either introduced into the NaOH absorption solution via bubbling or collected in PTFE-coated gas sampling bags for subsequent analysis. Online infrared gas analyzers continuously measure CO and CO₂ concentrations, while SO₂ and NOₓ are determined using dedicated measurement channels or chemical analysis methods. All test data are automatically recorded and stored by the control software.
Maintenance Information
Regularly inspect the quartz tube, ceramic combustion boat, and furnace interior for residue buildup and clean them as required. Check the condition of the activated carbon and silica gel in the filter columns and replace them when saturation or discoloration is observed. Verify calibration of gas analyzers and temperature sensors according to laboratory quality procedures. Ensure the lead-screw transmission and magnetic drive mechanisms operate smoothly to maintain positioning accuracy.
Send product request
Other supplier products
 |
Medical Face Mask Synthetic Blood Penetration Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applicable Standards: GB 19083-2010 YY/T 0691-2008 YY 0469-2011 ISO 22609 ASTM F1862-0... |
 |
Scratch Resistance Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application Primary applications: Scratch resistance testing of easily accessible solid i... |
 |
ASTM G133 Electrochemical Tribocorrosion Tester Manufacturer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Electrochemical Reciprocating Friction and Wear Tester is a specialized i... |
 |
Falling sand abrasion tester for ASTM D968 coating abrasion resistance test | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1)GB811-2022:Helmets for motorcycle and electric bicycle users (... |
 |
Test System for dusting solar cell modules | Soiling Tester，Soiling and Abrasion in Photovoltaics Test System | Whats/App: +86 156 1874 6768 Web: standard-groups.com The test system serves laboratory testing according to VDI 3956 (Test method for the dust s... |
Same products
 |
ER4043 Silicon Aluminum Welding Wire | Seller: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate... |
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | Seller: Taizhou Feike Mechanical Technology Co., Ltd. | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | Seller: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
