IEC / ISO Standard Halogen Acid Gas Tester for Cables

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Standards

The test apparatus is designed in accordance with the following international and national standards:

(1) GB/T 17650 – Determination of the Total Amount of Halogen Acid Gas Released During Combustion of Electric Cables

(2) IEC 60754-1 – Test on Gases Evolved During Combustion of Materials from Cables – Part 1: Determination of the Amount of Halogen Acid Gas

(3) IEC 60754-2 – Test on Gases Evolved During Combustion of Materials from Cables – Part 2: Determination of Acidity (by pH Measurement) and Conductivity

Parameters

Item	Specification
Tube Furnace Heating Length	600 mm
Maximum Heating Temperature	Up to 950 °C with thermal equilibrium
Temperature Measurement Range	0–1100 °C
Temperature Sensor	High-temperature K-type thermocouple
Temperature Accuracy	±0.1 °C
Quartz Tube	Heat-resistant quartz, thickness ≥ 2 mm
Carrier Gas	Compressed air
Equipment Dimensions	1500 (W) × 450 (D) × 400 (H) mm
Control Cabinet Dimensions	500 (W) × 400 (D) × 250 (H) mm
Power Supply	AC 220 V, 16 A
Weight	Approx. 80 kg

Features

Integrated structural design places the specimen guide tube and tube furnace on the same plane, minimizing positional deviation and improving glassware sealing performance.

Independent control cabinet enhances operational convenience and flexible equipment layout.

Tube furnace heating system adopts a temperature control module combined with a power regulator and PID control to ensure uniform and stable temperature rise.

Protective enclosure with perforated structure improves heat dissipation while protecting the furnace body.

Heat-resistant quartz tube is used for both gas transmission and specimen heating, with ground joints to enhance sealing performance.

Ceramic combustion boat is driven by a strong magnetic mechanism and transmission rod, ensuring stable and precise movement of specimens into the furnace core zone.

Lead screw transmission mechanism enables accurate positioning and smooth operation of the traction tube, reducing the risk of quartz tube damage caused by manual operation.

Imported precision rotameter controls carrier gas flow, combined with branded pressure gauge and pressure regulator to ensure stable airflow.

Dual filter columns filled with activated carbon and color-changing silica gel are used to purify and dry the carrier gas.

PLC and touchscreen control system enables intelligent temperature regulation and improved furnace temperature accuracy.

Built-in test programs for total halogen acid gas, conductivity, pH value, and quartz tube cleaning, with stored standard reference values.

Supplied with complete testing accessories including washing bottles, beakers, graduated cylinders, and magnetic stirrers.

High-quality pH meter and conductivity meter are included for accurate measurement of solution acidity and conductivity.

Accessories

(1) Heat-resistant quartz tube

(2) Ceramic combustion boat

(3) Precision rotameter

(4) Activated carbon filter column

(5) Color-changing silica gel filter column

(6) Glass washing bottles

(7) Beakers and graduated cylinders

(8) Magnetic stirrer

(9) pH meter

(10) Conductivity meter

Test Procedures

Prepare the cable specimen according to the relevant standard requirements and place it in the ceramic combustion boat.

Insert the combustion boat into the quartz tube and position it outside the furnace heating zone.

Set the target furnace temperature according to the selected standard (800 °C for IEC 60754-1 or 950 °C for IEC 60754-2).

Start the carrier gas flow and ensure stable airflow through the system.

Move the combustion boat into the furnace core zone using the magnetic transmission mechanism.

Collect the combustion gases through the absorption system.

Measure the total halogen acid gas volume, pH value, and electrical conductivity according to the selected test method.

Complete the test and perform the quartz tube cleaning procedure using the built-in program.

Maintenance Information

Regular inspection of the quartz tube, sealing joints, and gas pipelines is recommended to ensure reliable test results. The filter materials in the purification columns should be replaced periodically based on usage conditions. Temperature calibration of the thermocouple and verification of pH and conductivity meters should be conducted according to laboratory quality management requirements. After each test, the quartz tube and glassware should be thoroughly cleaned to avoid cross-contamination.

Other supplier products

	Film impact Tester (Gardner)	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Film Impact Tester (Gardner) is designed to evaluate the impact resistance of coatings ...
	Solar Climatic Test Chamber 丨Solar Climatic Test mechine	Whats/App: +86 156 1874 6768 Web: standard-groups.com Features and Benefits 1. Fully Compliant with IEC 61215 Specifically designed for the UV ...
	ASTM D2061 zipper slippage tester	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Zipper Smoothness Tester: This zipper testing instrument is used to test the ...
	Precision Rotary Vacuum Tribometer	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The Vacuum Friction and Wear Tester supports or is applicable to the following i...
	UV Lamp Aging Test Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard JTG E50 T1164: Testing methods for geosynthetics in highway engineering. GB/T 14...

All supplier products

Same products

	PanEVAP & MVR system	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
	PanBox welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...
	PanPHE gasketed plate heat exchangers	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanPHE gasketed plate heat exchangersare designed with easy access for regular servicing and for ...