Total Knee Prosthesis Wear Testing Machine | ISO 14243 Knee Joint Simulator
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
(1)YY/T 0651.2
(2)ISO 14243-1
These standards specify the testing requirements for total knee prostheses on a wear simulator equipped with axial load control, flexion/extension angle motion control, anterior-posterior displacement control, and tibial rotation motion control. The standards define the relative flexion/extension angular motion between joint components, loading protocols, test speeds and durations, specimen assembly, and test environment requirements.
Application
The Total Knee Prosthesis Wear Testing Machine is designed to simulate the in vivo mechanical environment of knee implants and evaluate their wear and durability. Key applications include:
Implant longevity assessment: Measure wear patterns and friction behavior of femoral and tibial components under simulated gait cycles.
Material and design comparison: Test different materials, coatings, or geometries to reduce wear and improve implant lifespan.
Quality control: Ensure total knee prostheses meet mechanical and wear performance standards before clinical use.
Research and development: Optimize implant articulation, alignment, and lubrication strategies for better patient outcomes.
Standards compliance: Conduct tests according to ISO 14243. ASTM F2706. and other relevant international standards.
This machine provides crucial data for predicting implant lifespan and improving knee prosthesis safety and performance.
Product Features
Next-generation fatigue testing system driven by a large electromagnetic motor;
Direct-drive electromagnetic motor provides stable operation with high repeatability, ensuring precise control of force and displacement;
Integrated electromagnetic actuator features low friction and high repeatability, with rapid system response and high speed;
Capable of performing tensile, compressive, bending, shear, creep, and relaxation tests;
Meets modern material testing requirements for high precision, high frequency, high stability, and durability;
Oil-free, seal-free, maintenance-free design with long service life, high integration, easy installation, and small footprint;
Wide range of fixtures and accessories available.
Technical Specifications
| Parameter | Specification |
|---|---|
| Maximum peak load | 14.000 N |
| Dynamic peak load | 12.000 N |
| Static peak load | 8.400 N |
| Machine grade | 0.5 |
| Load measurement range | 0.4% – 100% F.S. |
| Load measurement accuracy | better than ±0.2% of indicated value (within load range) |
| Maximum fatigue loading frequency | 100 Hz |
| Axial stroke | 30 mm |
| Displacement resolution | 0.1 μm |
| Test space (between upper and lower fixtures) | 0–950 mm |
| Net weight | approximately 1.500 kg |
| Dimensions | approximately 1.000 × 1.000 × 2.000 mm |
| Optional environmental accessories | water bath, high-temperature, low-temperature, humidity control, etc. |
| Applications | Fatigue, fracture, and static testing of metals, polymers, and composite materials; Static and dynamic testing of surgical implants (e.g., trauma, joint, spine, dental applications); Tensile fatigue testing of polymers; Crack propagation testing of rubber materials |
| Optional Fixtures | Mechanical tensile, compression, and bending fixtures; Specialized femoral stem fixtures; Four-point bending fixtures; Pedicle screw/rod system fixtures; Tibial plateau fixtures; Vertebral resection model compression/tension fixtures; Dental implant fixtures |
Accessories
(1)Femoral and tibial fixtures for different implant sizes.
(2)Lubrication system simulating synovial fluid.
(3)Load and motion actuators for flexion-extension and axial rotation.
(4)Sensors for force, displacement, and wear measurement.
Send product request
Other supplier products
 |
Falling Sand Abrasion Test machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com The sand abrasion tester is a specialized testing device used to evaluate the abrasion resi... |
 |
Hair Dryer Temperature Test System | Whats/App: +86 156 1874 6768 Web: standard-groups.com TheHair Dryer Temperature Testing Deviceis a dedicated test apparatus designed for evaluati... |
 |
Nonwoven liquid penetration time tester supplier | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com TheG031 Fabric Liquid Penetration Time Testeris designed to measure the liqui... |
 |
Battery Powder Compaction Density Evaluation System | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application (1) Measurement of tapped density and compaction characteristics of lithium-io... |
 |
Mechanical load testing machine for photovoltaic modules | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification a... |
