Gas Explosion Pressure Test Apparatus for Safety Research
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
The system conforms to the following national and international standards:
BS EN 15967:2011 – Determination of maximum explosion pressure and maximum rate of pressure rise of gases and vapours
UL 9540A – Standard for Testing Energy Storage Systems and Equipment
ISO 10156 – Gases and Gas Mixtures – Determination of Flammability Limits
ASTM E1226 – Standard Test Method for Explosibility of Dust Clouds
Parameters
| Unit | Specification |
|---|---|
| Explosion Pressure Acquisition | Dynamic data acquisition card, 24-bit resolution, 128 KS/s sampling frequency |
| Chamber Interior | Built-in 19-inch touch screen, integrated electrical control circuits for mobility |
| Test Container | Sphere structure, internal volume ≈ 20 L, internal radius 168 mm, wall thickness 12 mm, stainless steel, max. pressure 3 MPa |
| Chamber Pressure Rating | Maximum 3 MPa, constant endurance ≥ 2 MPa, engineering safety valve rated 2.5 MPa |
| Ignition Electrode | Center-mounted, diameter 4 mm, tip angle 60°, distance between tips ≈ 5 mm |
| Thermocouple | K-type armored, range 0–1000 °C, accuracy 0.1 °C |
| Explosion Container Dimensions | 1800 (L) × 750 (D) × 1750 (H) mm |
| Control Box Dimensions | 650 (W) × 675 (D) × 1750 (H) mm |
| Power Supply | AC 220 V, 50/60 Hz |
| Weight | Approx. 330 kg |
| Auxiliary Gas Source | Nitrogen |
Features
Electrical control cabinet with metal frame and electrostatic spray finish; resistant to dirt, wear, and oil; easy to clean and visually appealing.
Siemens PLC with analog modules controls vacuum, purging, temperature, and pressure readings; real-time monitoring of temperature, pressure, explosion pressure, and explosion slope.
Test data can be exported as Excel, Word, or PDF for reporting and analysis.
Sphere front features explosion-proof observation window; top equipped with threaded ignition device.
Thermocouple mounted via rear flange, replaceable for maintenance or specific testing needs.
Multiple interfaces for vacuum, sample gas inlet, purging, manual sampling, and pressure monitoring; includes several ½-inch ports for additional customer-configured devices.
Ignition electrode fixed on removable threaded flange for easy cleaning of carbon deposits.
Thermocouple fixed with threaded ferrule interface for easy installation and sealing.
Manual ball valve for post-test gas sampling and analysis.
Accessories
Stainless steel spherical test container
Explosion-proof observation window
Ignition electrode assembly
K-type armored thermocouple with flange and ferrule interfaces
Siemens PLC and analog modules
19-inch touch screen
Electrical control cabinet with industrial PC and data acquisition modules
Manual ball valve
Safety pressure relief valve (2.5 MPa)
Auxiliary nitrogen supply interface
Test Procedures
Ensure the chamber is evacuated and all connections are secure.
Fill the test container with the desired gas sample to the required concentration.
Activate the PLC-controlled system to monitor temperature and pressure in real time.
Initiate ignition via the central electrode.
Observe internal explosion event through the explosion-proof window.
Record pressure, temperature, explosion slope, and rise rate via dynamic data acquisition system.
Collect gas samples post-test using manual ball valve for further analysis.
Export all recorded data for report generation in Excel, Word, or PDF format.
Maintenance Information
Inspect and clean the ignition electrode regularly to remove carbon deposits.
Verify thermocouple calibration and replace if necessary.
Check all ports, flanges, and threaded interfaces for gas-tight integrity.
Ensure PLC, data acquisition modules, and industrial PC are operating correctly.
Clean observation window to maintain visibility during tests.
Test safety valves and pressure relief systems periodically for proper functionality.
Send product request
Other supplier products
 |
Laboratory needle flame tester | Product description Needle flame testeris the needle-shaped burner by a certain size, fill the inside with a specific gas (butane), and at 45 °... |
 |
Safety Helmet Impact Acceleration Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Purpose This instrument is suitable for impact - collision tests of helmets. It is a testi... |
 |
Standard Helmet Visual Field Tester | The Standard Helmet Visual Field Tester is a precision instrument designed to evaluate the peripheral vision and visor obstruction of safety helmet... |
 |
Electric pencil hardness meter | Product Introduction: This machine is suitable for all kinds of finished product spray hardness test, such as: mobile shell, laptop computer shel... |
 |
Flooring VOC Emission Testing Chamber | Standard ISO 16000-9(Indoor Air - Determination of Volatile Organic Compounds) ASTM D5116(Standard Guide for Small-Scale Environmental Chamber ... |
Same products
 |
ISO 29463 HEPA/ULPA filter performance testing System | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system supports and compli... |
 |
High-Precision ISO 16890 Filter Media Test Rig for R&D and QC | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system can execute and com... |
 |
Mobile Floor Scrubber Aging Life Tester IEC 60312 | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com TheMobile Floor Scrubber Aging L... |
 |
ISO 12103 Cleanable Filter Media Test System | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system complies with: (1)... |
 |
Robotic Vacuum Cleaners Edge-Following Tester | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com TheEdge-Following Test Equipment... |
