Gas Explosion Pressure Test Apparatus for Safety Research
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
The system conforms to the following national and international standards:
BS EN 15967:2011 – Determination of maximum explosion pressure and maximum rate of pressure rise of gases and vapours
UL 9540A – Standard for Testing Energy Storage Systems and Equipment
ISO 10156 – Gases and Gas Mixtures – Determination of Flammability Limits
ASTM E1226 – Standard Test Method for Explosibility of Dust Clouds
Parameters
| Unit | Specification |
|---|---|
| Explosion Pressure Acquisition | Dynamic data acquisition card, 24-bit resolution, 128 KS/s sampling frequency |
| Chamber Interior | Built-in 19-inch touch screen, integrated electrical control circuits for mobility |
| Test Container | Sphere structure, internal volume ≈ 20 L, internal radius 168 mm, wall thickness 12 mm, stainless steel, max. pressure 3 MPa |
| Chamber Pressure Rating | Maximum 3 MPa, constant endurance ≥ 2 MPa, engineering safety valve rated 2.5 MPa |
| Ignition Electrode | Center-mounted, diameter 4 mm, tip angle 60°, distance between tips ≈ 5 mm |
| Thermocouple | K-type armored, range 0–1000 °C, accuracy 0.1 °C |
| Explosion Container Dimensions | 1800 (L) × 750 (D) × 1750 (H) mm |
| Control Box Dimensions | 650 (W) × 675 (D) × 1750 (H) mm |
| Power Supply | AC 220 V, 50/60 Hz |
| Weight | Approx. 330 kg |
| Auxiliary Gas Source | Nitrogen |
Features
Electrical control cabinet with metal frame and electrostatic spray finish; resistant to dirt, wear, and oil; easy to clean and visually appealing.
Siemens PLC with analog modules controls vacuum, purging, temperature, and pressure readings; real-time monitoring of temperature, pressure, explosion pressure, and explosion slope.
Test data can be exported as Excel, Word, or PDF for reporting and analysis.
Sphere front features explosion-proof observation window; top equipped with threaded ignition device.
Thermocouple mounted via rear flange, replaceable for maintenance or specific testing needs.
Multiple interfaces for vacuum, sample gas inlet, purging, manual sampling, and pressure monitoring; includes several ½-inch ports for additional customer-configured devices.
Ignition electrode fixed on removable threaded flange for easy cleaning of carbon deposits.
Thermocouple fixed with threaded ferrule interface for easy installation and sealing.
Manual ball valve for post-test gas sampling and analysis.
Accessories
Stainless steel spherical test container
Explosion-proof observation window
Ignition electrode assembly
K-type armored thermocouple with flange and ferrule interfaces
Siemens PLC and analog modules
19-inch touch screen
Electrical control cabinet with industrial PC and data acquisition modules
Manual ball valve
Safety pressure relief valve (2.5 MPa)
Auxiliary nitrogen supply interface
Test Procedures
Ensure the chamber is evacuated and all connections are secure.
Fill the test container with the desired gas sample to the required concentration.
Activate the PLC-controlled system to monitor temperature and pressure in real time.
Initiate ignition via the central electrode.
Observe internal explosion event through the explosion-proof window.
Record pressure, temperature, explosion slope, and rise rate via dynamic data acquisition system.
Collect gas samples post-test using manual ball valve for further analysis.
Export all recorded data for report generation in Excel, Word, or PDF format.
Maintenance Information
Inspect and clean the ignition electrode regularly to remove carbon deposits.
Verify thermocouple calibration and replace if necessary.
Check all ports, flanges, and threaded interfaces for gas-tight integrity.
Ensure PLC, data acquisition modules, and industrial PC are operating correctly.
Clean observation window to maintain visibility during tests.
Test safety valves and pressure relief systems periodically for proper functionality.
在线联系供应商
Other supplier products
 |
Gas Hazard Property Analyzer | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction This tester is used to test the flammable concentration range of gase... |
 |
Suture Needle Elasticity and Toughness Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Elasticity and Toughness Tester for Suture Needles is a specialized device dedicated to... |
 |
GAS Combustion Rate Tester,ISO817,Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction The combustible gas combustion rate tester is developed in accordance with th... |
 |
ISO 14704 Hosiery Stretch Testing Machine Factory | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Features Ergonomic design: Control panel located at ~100 cm height f... |
 |
ASTM D1603 Carbon Black Measurement Machine | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The Carbon Black Content Tester has wide applications in indust... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
