Laboratory tribology research equipment

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Standards

GB/T 6040-2008 Test Method for Wear Resistance of Metal Surfaces

GB/T 17657-2022 Test Methods of Evaluating the Properties of Wood-Based Panels and Surface-Finished Panels (including abrasion and scratch tests)

ISO 20502 Fine Ceramics and Coatings — Scratch and Wear Testing

ASTM D3702 Test Method for Wear Rate of Materials Using a Rotating Drum Apparatus

ASTM D1894 Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting

JIS K 7317:2022 Plastics — Film and Sheeting — Determination of Coefficient of Friction

JIS L 0849 Testing Methods for Abrasion Resistance of Plastic Products

Parameters

Parameter	Specification
Sliding speed	5 mm/min – 6000 mm/min
Drive motor	AC servo motor
Drive mechanism	Rack and pinion
Sliding distance	1 – 100 mm
Motion mode – single	Stops automatically after preset distance
Motion mode – reciprocating	Reciprocating motion at set distance (up to 9.999.999 cycles)
Measurement range	0 – 1000 gf
Safety device	Overload protection
Operating environment	0 – 50 °C, ≤85% RH, non-condensing
Power supply	AC 100 V, 50/60 Hz
Dimensions	W 475 × D 450 × H 475 mm (excluding protrusions)

Features

Load transducer positioned directly above the measurement point, eliminating unnecessary mechanisms and enabling direct friction force measurement

Optimized structural design minimizes response delay and setup-induced measurement errors

Orthogonal arrangement between worktable sliding direction and mechanical arm, eliminating load variation between forward and return strokes

Significantly improved repeatability and reliability of wear test results

Standard large pop-up acrylic safety cover allows observation during testing

Optional sealed enclosure configuration supports testing under controlled environmental or temperature conditions

Accessories

(1) Standard accessory set supplied with the machine

(2) Safety acrylic cover

(3) Operating documentation

Test Procedures

Secure the test specimen firmly on the worktable.

Select the appropriate test mode (single or reciprocating).

Set the sliding speed, distance, and load parameters according to the test standard.

Ensure the safety cover is properly positioned.

Start the test and monitor friction force and wear behavior during operation.

Stop the test automatically or manually upon completion.

Evaluate wear and friction results based on the applicable standard.

Other supplier products

	Infusion Pump Flow Rate Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The infusion set flow rate tester is an instrument specifically designed for ...
	ASTM E84 Steiner Tunnel Test Installation	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application Interior and exterior building materials: Testing flame spread performance of ...
	Automotive High-Low Temp & Humidity Chamber	Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications 1. Automotive R&D Testing Cold Start Test: Verifies engine starting perf...
	High-Speed Screening Calorimeter	Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction： The rapid - screening calorimeter is a professional calorimetric ins...
	Safety Helmet Roll-off Testing Equipment	Whats/App: +86 156 1874 6768 Web: standard-groups.com Purpose Apply an initial load of a certain force to the rear of the helmet. Then, let a we...

All supplier products

Same products

	Surface adhesion testing equipment factory price	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards JIS L 1066 (Testing Methods fo...
	Continuous load scratch resistance tester manufacturer	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ISO DIS 12137-2 (Plastics &mda...
	High precision continuous load surface tester	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 6040-2008 Test Method for...
	Multi-function surface performance test system	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 6040-2008 Test Method for...
	Laboratory tribology research equipment	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 6040-2008 Test Method for...