Laboratory tribology research equipment
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
GB/T 6040-2008 Test Method for Wear Resistance of Metal Surfaces
GB/T 17657-2022 Test Methods of Evaluating the Properties of Wood-Based Panels and Surface-Finished Panels (including abrasion and scratch tests)
ISO 20502 Fine Ceramics and Coatings — Scratch and Wear Testing
ASTM D3702 Test Method for Wear Rate of Materials Using a Rotating Drum Apparatus
ASTM D1894 Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
JIS K 7317:2022 Plastics — Film and Sheeting — Determination of Coefficient of Friction
JIS L 0849 Testing Methods for Abrasion Resistance of Plastic Products
Parameters
| Parameter | Specification |
|---|---|
| Sliding speed | 5 mm/min – 6000 mm/min |
| Drive motor | AC servo motor |
| Drive mechanism | Rack and pinion |
| Sliding distance | 1 – 100 mm |
| Motion mode – single | Stops automatically after preset distance |
| Motion mode – reciprocating | Reciprocating motion at set distance (up to 9.999.999 cycles) |
| Measurement range | 0 – 1000 gf |
| Safety device | Overload protection |
| Operating environment | 0 – 50 °C, ≤85% RH, non-condensing |
| Power supply | AC 100 V, 50/60 Hz |
| Dimensions | W 475 × D 450 × H 475 mm (excluding protrusions) |
Features
Load transducer positioned directly above the measurement point, eliminating unnecessary mechanisms and enabling direct friction force measurement
Optimized structural design minimizes response delay and setup-induced measurement errors
Orthogonal arrangement between worktable sliding direction and mechanical arm, eliminating load variation between forward and return strokes
Significantly improved repeatability and reliability of wear test results
Standard large pop-up acrylic safety cover allows observation during testing
Optional sealed enclosure configuration supports testing under controlled environmental or temperature conditions
Accessories
(1) Standard accessory set supplied with the machine
(2) Safety acrylic cover
(3) Operating documentation
Test Procedures
Secure the test specimen firmly on the worktable.
Select the appropriate test mode (single or reciprocating).
Set the sliding speed, distance, and load parameters according to the test standard.
Ensure the safety cover is properly positioned.
Start the test and monitor friction force and wear behavior during operation.
Stop the test automatically or manually upon completion.
Evaluate wear and friction results based on the applicable standard.
在线联系供应商
Other supplier products
 |
Ball Rebound Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Ball Rebound Tester is a specialized device used to evaluate the elastic properties of ... |
 |
Automatic perspiration fastness tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Perspiration Testeris a laboratory instrument designed to evaluate the re... |
 |
Combustion Flue Gas Treatment System Manufacturer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com E-mail：info@standard-groups。com Parameters UnitSpecification Pre... |
 |
Contact heat resistance tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The contact heat resistance tester evaluates materials' ability to withstand high-temperatu... |
 |
Catheter Power Injection Flow and Pressure Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The catheter flow and pressure tester for power injection is an important med... |
Same products
 |
ER4047 Aluminum Mig Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing reliable welding material... |
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate... |
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | 卖方: Taizhou Feike Mechanical Technology Co., Ltd. | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
