Precision Rotary Vacuum Tribometer
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
The Vacuum Friction and Wear Tester supports or is applicable to the following international and industry standards:
NASA / SAE AMS 3150 (Vacuum friction and wear testing of aerospace materials)
ESA PSS-01-705 (Friction and wear testing for space application materials under vacuum)
GB/T 6040-2008 (Metallic surface wear resistance test method)
GB/T 10375-2008 (Tribological test methods – reciprocating friction and wear testing)
ISO 12137-2 (Abrasion resistance of coated fabrics and films – environmental testing)
ISO 20502 (Fine ceramics and coatings scratch / wear testing, adaptable to vacuum conditions)
JIS L 0849 (Abrasion resistance test method for plastic products, optional vacuum conditions)
JIS P 8139 (Friction and wear performance evaluation of coatings, applicable in vacuum chambers)
Parameters
| Parameter Category | Specification |
|---|---|
| Vertical Load | 10–1000 g |
| Loading Method | Weight loading, switchable configuration |
| Specimen Fixing Method | Central bolt fixing (adjustable to specimen shape); vacuum chuck (optional) |
| Force Sensor | Capacity: 9.8 N; Measurement accuracy: ±0.098 N |
| Upper Specimen Holder | Dedicated clamping fixture |
| Lower Specimen Fixing | Bolted to rotating worktable |
| Rotating Table Size | φ60 mm |
| Rotational Speed Range | 1–2000 rpm |
| Vacuum Pump System | Turbomolecular pump combined with rotary pump |
| Dynamic Strain Amplifier | Integrated within control rack |
| Friction Force / External Output | External output terminal on control rack |
| Data Analysis System | General-purpose friction analysis software |
Features
Vacuum-integrated tribological testing structure
A well-established friction and wear testing mechanism is housed within a vacuum chamber, enabling accurate testing under low-pressure conditions.
Stable and reliable loading system
The balanced weight loading method allows precise load application starting from low loads, ensuring consistent contact conditions during testing.
Flexible test configuration
The rotating worktable supports a wide range of test modes, including optional high-speed wear testing and customized low-load configurations.
Wide vacuum capability
The standard configuration achieves vacuum levels down to 10 Pa, with optional high-vacuum specifications available to meet specialized testing requirements.
Integrated data acquisition and analysis
Friction force signals are captured via a dedicated sensor and processed using professional tribological analysis software for reliable result interpretation.
Accessories
Specimen holding clamps (customized upon request)
Tribological analysis software with A/D converter
Power cable
Operation manual
Test Procedures
Install the upper and lower specimens using the designated clamping fixtures.
Seal the vacuum chamber and initiate the vacuum pump system to reach the target pressure.
Set the desired normal load using the weight loading mechanism.
Configure rotational speed and test duration parameters via the control system.
Start the test and continuously monitor friction force signals during operation.
Upon completion, vent the chamber safely and remove the specimens for post-test analysis.
Analyze friction and wear data using the supplied software.
在线联系供应商
Other supplier products
 |
Single - Strand Bending Tester STD - FB2 - SH | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possib... |
 |
Thin Film Pendulum Impact Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Main Uses of the Film Pendulum Impact Tester The film pendulum impact tester is mainly use... |
 |
Commercial Liquid Penetration Sliding Test Machine | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The G373 Liquid Sliding Penetration Comprehensive Performance Tester is a pre... |
 |
Shoelace anti-siphon tester丨Shoelace anti-siphon test mechine | |
 |
Helmet Strap Tensile Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The helmet strap tensile testing machine is designed to simulate tensile, impact, and durab... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
