Precision Reciprocating Friction and Wear Tester Model 2M
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
GB/T 3960-2016 Plastics – Determination of Sliding Wear Properties
ASTM G99 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
ASTM G133 Standard Test Method for Linearly Reciprocating Pin-on-Flat Sliding Wear
ISO 20502 Coating Scratch Test
DIN 50324 Friction and Wear Test Standard
Parameters
| Parameter | Specification |
|---|---|
| Test Load Range | 30–1000 g (weight loading), 10–200 N (automatic); accuracy 0.2% F.S. |
| Reciprocating Frequency | 0.1–45 Hz, adjustable |
| Reciprocating Stroke | 0.5–25 mm, adjustable according to frequency |
| Sample Heating Furnace Temp. | Room temperature – 300°C (sample diameter Φ15–40 mm) |
| Test Load in Furnace | 0.3–80 N |
| Friction Force Measurement | ≤100 N |
| Wear Depth Measurement | ±0.5 mm |
| Power Supply | 210–235 V, 50–60 Hz, 2500 W |
| Workbench Size | 1800 × 750 × 800 mm (user-supplied) |
Features
Wide load and adjustable frequency to accommodate various materials and component tests.
Testing possible at room temperature and high temperature up to 300°C.
Real-time measurement of friction coefficient, wear depth, wear volume, and surface profile with graphical display.
Automatic stop protection ensures safe operation.
User-friendly operation with high measurement accuracy, suitable for research and industrial quality control.
Accessories
| Accessory | Specification / Use |
|---|---|
| Reciprocating Friction Pair | Replaceable to accommodate different materials and sample sizes |
| Sample Heating Furnace | High-temperature testing, room temperature – 300°C |
| Data Acquisition Software | Real-time recording of friction force, wear depth, and friction coefficient |
| Power Cable | Input 210–235 V, 50–60 Hz |
| Weight Set | For manual loading of test force |
Test Principle
The tester applies adjustable load to a reciprocating friction pair on the sample surface. Friction force and friction coefficient are measured in real time. With the high-temperature furnace, tests can be conducted at various temperatures. Wear depth and wear volume are recorded by sensors. The computer automatically collects data and generates test curves to evaluate material wear resistance and tribological properties.
Operation Instructions
Ensure the sample is securely installed in the fixture; sample diameter in the furnace should be Φ15–40 mm.
Set sliding frequency, stroke, test load, and furnace temperature.
Start the test and monitor real-time friction force and wear depth.
Do not touch moving parts during testing to ensure safety.
Save data after testing, turn off the power, and clean the sample and fixture.
Experimental Flow
Install and secure the sample in the fixture; verify sample matches furnace dimensions.
Set reciprocating frequency, stroke, test load, and furnace temperature.
Start the test; the instrument runs automatically and records friction force, wear depth, and wear volume in real time.
Monitor friction curves and wear development during the experiment.
After testing, generate a report including friction coefficient, wear volume, and wear resistance analysis.
Clean the sample and prepare for the next test.
Send product request
Other supplier products
 |
Hydraulic Component Cleanliness Analysis System ISO 4407 | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Compliant standards VDA19.IS016232.NAS1638.IS04406 Particle standards Buil... |
 |
Aerosol Foams Flammability Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction This product complies with "Recommendations on the Transport of Dange... |
 |
ISO Standard High Precision Continuous Load Surface Performance Measurement Instrument | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Continuous Load Surface Performance Measurement Instrument is designed fo... |
 |
Programmable air flow drying rate test system | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The Airflow Method Fabric Drying Rate Tester is an automated testing instrume... |
 |
Rubber Mechanical Properties Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The Rubber Sleeve Rebound Tester is designed to comply with the following standa... |
Same products
 |
MMA-120 Handheld Arc Welder | Seller: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
