Precision Reciprocating Friction and Wear Tester Model 2M
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
GB/T 3960-2016 Plastics – Determination of Sliding Wear Properties
ASTM G99 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
ASTM G133 Standard Test Method for Linearly Reciprocating Pin-on-Flat Sliding Wear
ISO 20502 Coating Scratch Test
DIN 50324 Friction and Wear Test Standard
Parameters
| Parameter | Specification |
|---|---|
| Test Load Range | 30–1000 g (weight loading), 10–200 N (automatic); accuracy 0.2% F.S. |
| Reciprocating Frequency | 0.1–45 Hz, adjustable |
| Reciprocating Stroke | 0.5–25 mm, adjustable according to frequency |
| Sample Heating Furnace Temp. | Room temperature – 300°C (sample diameter Φ15–40 mm) |
| Test Load in Furnace | 0.3–80 N |
| Friction Force Measurement | ≤100 N |
| Wear Depth Measurement | ±0.5 mm |
| Power Supply | 210–235 V, 50–60 Hz, 2500 W |
| Workbench Size | 1800 × 750 × 800 mm (user-supplied) |
Features
Wide load and adjustable frequency to accommodate various materials and component tests.
Testing possible at room temperature and high temperature up to 300°C.
Real-time measurement of friction coefficient, wear depth, wear volume, and surface profile with graphical display.
Automatic stop protection ensures safe operation.
User-friendly operation with high measurement accuracy, suitable for research and industrial quality control.
Accessories
| Accessory | Specification / Use |
|---|---|
| Reciprocating Friction Pair | Replaceable to accommodate different materials and sample sizes |
| Sample Heating Furnace | High-temperature testing, room temperature – 300°C |
| Data Acquisition Software | Real-time recording of friction force, wear depth, and friction coefficient |
| Power Cable | Input 210–235 V, 50–60 Hz |
| Weight Set | For manual loading of test force |
Test Principle
The tester applies adjustable load to a reciprocating friction pair on the sample surface. Friction force and friction coefficient are measured in real time. With the high-temperature furnace, tests can be conducted at various temperatures. Wear depth and wear volume are recorded by sensors. The computer automatically collects data and generates test curves to evaluate material wear resistance and tribological properties.
Operation Instructions
Ensure the sample is securely installed in the fixture; sample diameter in the furnace should be Φ15–40 mm.
Set sliding frequency, stroke, test load, and furnace temperature.
Start the test and monitor real-time friction force and wear depth.
Do not touch moving parts during testing to ensure safety.
Save data after testing, turn off the power, and clean the sample and fixture.
Experimental Flow
Install and secure the sample in the fixture; verify sample matches furnace dimensions.
Set reciprocating frequency, stroke, test load, and furnace temperature.
Start the test; the instrument runs automatically and records friction force, wear depth, and wear volume in real time.
Monitor friction curves and wear development during the experiment.
After testing, generate a report including friction coefficient, wear volume, and wear resistance analysis.
Clean the sample and prepare for the next test.
在线联系供应商
Other supplier products
 |
Electrical flammability tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ASTM D 6194-03:Standard Test Method for Glow-Wire Ignition of Materials ASTM D6... |
 |
High Precision Full Car Sunlight Aging Tester Direct Factory China | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 12535-2007 Test Methods for Starting Performance of Automobil... |
 |
Anti-glare board drop weight testing machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com The falling weight impact testing machine is suitable for determining the external impact r... |
 |
ROSS zigzag tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction: The ROSS zigzag resistance tester installed the sole strip test piec... |
 |
Helmet Material Weather Resistance Tester ASTM G151 | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Xenon lamp aging test chamber, also known as xenon arc lamp agi... |
Same products
 |
不锈钢焊剂芯焊丝 E308T1-1 E308HT1-1 E308LT1-1 用于304不锈钢焊接的气保焊丝 | 卖方: 863048 | 产品描述 不锈钢药芯焊丝 E308T1-1 E308HT1-1 E308LT1-1，FCAW不锈钢焊丝，AWS A5.22药芯焊丝，304不锈钢焊接耗材，低碳不锈钢药芯焊丝，耐高温不锈钢焊丝，... |
 |
E317LT1-1 焊剂芯线 CO2 不锈钢焊剂含量70% 直径1.0/1.2/1.6mm OEM定制 1200℃熔点 | 卖方: 863048 | 迅卓不锈钢药心焊丝 E317LT1-1 分类： Сварочная проволока E317LT1-1 с флюсом, нержавеющая сталь, 70% содержан... |
 |
Mini Jewelry Laser Repair System – 60W to 400W Precision Welding | 卖方: Beijing JCZ Technology Co., Ltd | The Mini Jewelry Laser Welding Machineis an advanced mini laser welding system engineered for pre... |
 |
Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal | 卖方: Beijing JCZ Technology Co., Ltd | TheHCP-M SeriesBackpack Laser Cleaning Machinefeatures a compact pulsed fiber laser system, desig... |
 |
Suitcase Pulsed Laser Cleaning Machine | Ultra-Portable Handheld Fiber Laser Cleaner | 卖方: Beijing JCZ Technology Co., Ltd | The Suitcase Pulsed Laser Cleaning Machineis an ultra-portable, high-precision handheld fiber las... |
