Precision Reciprocating Friction and Wear Tester Model 2M

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Standards

GB/T 3960-2016 Plastics – Determination of Sliding Wear Properties

ASTM G99 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus

ASTM G133 Standard Test Method for Linearly Reciprocating Pin-on-Flat Sliding Wear

ISO 20502 Coating Scratch Test

DIN 50324 Friction and Wear Test Standard

Parameters

Parameter	Specification
Test Load Range	30–1000 g (weight loading), 10–200 N (automatic); accuracy 0.2% F.S.
Reciprocating Frequency	0.1–45 Hz, adjustable
Reciprocating Stroke	0.5–25 mm, adjustable according to frequency
Sample Heating Furnace Temp.	Room temperature – 300°C (sample diameter Φ15–40 mm)
Test Load in Furnace	0.3–80 N
Friction Force Measurement	≤100 N
Wear Depth Measurement	±0.5 mm
Power Supply	210–235 V, 50–60 Hz, 2500 W
Workbench Size	1800 × 750 × 800 mm (user-supplied)

Features

Wide load and adjustable frequency to accommodate various materials and component tests.

Testing possible at room temperature and high temperature up to 300°C.

Real-time measurement of friction coefficient, wear depth, wear volume, and surface profile with graphical display.

Automatic stop protection ensures safe operation.

User-friendly operation with high measurement accuracy, suitable for research and industrial quality control.

Accessories

Accessory	Specification / Use
Reciprocating Friction Pair	Replaceable to accommodate different materials and sample sizes
Sample Heating Furnace	High-temperature testing, room temperature – 300°C
Data Acquisition Software	Real-time recording of friction force, wear depth, and friction coefficient
Power Cable	Input 210–235 V, 50–60 Hz
Weight Set	For manual loading of test force

Test Principle

The tester applies adjustable load to a reciprocating friction pair on the sample surface. Friction force and friction coefficient are measured in real time. With the high-temperature furnace, tests can be conducted at various temperatures. Wear depth and wear volume are recorded by sensors. The computer automatically collects data and generates test curves to evaluate material wear resistance and tribological properties.

Operation Instructions

Ensure the sample is securely installed in the fixture; sample diameter in the furnace should be Φ15–40 mm.

Set sliding frequency, stroke, test load, and furnace temperature.

Start the test and monitor real-time friction force and wear depth.

Do not touch moving parts during testing to ensure safety.

Save data after testing, turn off the power, and clean the sample and fixture.

Experimental Flow

Install and secure the sample in the fixture; verify sample matches furnace dimensions.

Set reciprocating frequency, stroke, test load, and furnace temperature.

Start the test; the instrument runs automatically and records friction force, wear depth, and wear volume in real time.

Monitor friction curves and wear development during the experiment.

After testing, generate a report including friction coefficient, wear volume, and wear resistance analysis.

Clean the sample and prepare for the next test.

Другие товары поставщика

	Gakushin Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com ThisGakushin Type Rubbing Testeris a standard testing machine of the Type II rubbing tester...
	Bone Screw Pull-out Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard YY/T 1504. ASTM F543: standard specifies a test method for measuring the axial f...
	ASTM ISO High-Load Tribology Tester Factory Supplier	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com High-Pressure Friction and Wear Tester is a temperature-controlled tribologic...
	Micro-hole Detection Instrument	Whats/App: +86 156 1874 6768 Web: standard-groups.com The pinhole tester for aluminum foil is a device specifically used to detect micro - pinhol...
	Plastic Drainage Board Horizontal Water Flow Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Plastic Drainage Board Horizontal Water Flow Tester is used to determine the characteri...

Все товары поставщика

Похожие товары

	ER4047 Aluminum Mig Welding Wire	Продавец: 868776	Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing reliable welding material...
	ER4043 Silicon Aluminum Welding Wire	Продавец: 868776	Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate...
	Choosing the Right Equipment for Heavy-Duty Cleaning	Продавец: Taizhou Feike Mechanical Technology Co., Ltd.	FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve...
	ER4043 Silicon Aluminum Welding Wire	Продавец: 868776	Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin...
	Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением	Продавец: Shandong HUASU Plastic Technology Co.,Ltd.	Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ...