FAA Burn-Through Resistance Tester for Aerospace Insulation Materials
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
E-mail：info@standard-groups。com
Parameters
| Item | Specification |
|---|---|
| Overall dimensions | 1500 mm (W) × 1800 mm (H) × 900 mm |
| System weight | 150 kg |
| Power requirement | 220 V, 10 A |
| Operating temperature | 10°C to 35°C |
| Fuel type | Aviation kerosene |
| Air supply | Minimum 120 PSI compressed air |
| Flame temperature capability | ≥ 2000 ± 50 ℉ |
| Heat flux output | ≥ 10.6 W/cm² |
| Temperature control bath | ≥ 2 × 0.14 m³ |
Features
Incorporates the FAA-approved NexGen aviation fuel burner, developed to replace discontinued legacy burners (Park DPL 3400. Lennox OB-32. Carlin 200 CRD).
Retains the operational principles of previous burner generations while enabling more precise measurement of fuel and air test parameters.
Modular architecture facilitates future FAA upgrades without full system replacement.
The burner cone is fabricated from corrosion-resistant and high-temperature alloy to ensure durability in severe thermal conditions.
The NexGen burner includes key components such as baffle, fuel nozzle, igniter, fuel rail, mounting plates, ventilation duct, housing, muffler, and acoustic resistance unit.
Equipped with fuel pressure gauge, fuel solenoid valve, fuel temperature sensor, air pressure regulator, and air temperature sensor for stable control.
A temperature-controlled ice bath system (≥ 2 × 0.14 m³) allows regulation of fuel temperature prior to combustion.
Flame characteristics can be adjusted by modifying fuel nozzle configuration and air pressure input to meet different standard requirements.
The burner is covered with a thermal insulation blanket to protect fuel lines and the burner body.
Capable of delivering flame temperature of at least 2000 ± 50 ℉ and heat flux of at least 10.6 W/cm².
Mounted on a heavy-duty steel frame that supports both horizontal and vertical specimen installation.
Calibration utilizes a thermocouple comb composed of seven grounded K-type thermocouples (1.6 mm diameter, ceramic-insulated, metal-sheathed, 30 AWG wire), fixed on an angle bracket for standardized placement on the specimen frame.
Includes a radiant heat flux sensor with cooling system, installed on a fixed support bracket for reliable measurement.
Accessories
The system is supplied with the following components:
NexGen aviation fuel burner
Flame penetration test fixture for thermal and acoustic insulation
Dynamic loading motion system
Fuel temperature control ice bath
Thermocouple calibration comb
Radiant heat flux sensor with cooling unit
Heavy-duty specimen mounting frame
Burner thermal insulation blanket
Test Procedures
Mount the test specimen on the horizontal or vertical frame according to the selected standard.
Connect aviation kerosene supply and compressed air (≥120 PSI).
Set and stabilize fuel temperature using the ice bath system.
Adjust air pressure and fuel flow parameters per test requirements.
Ignite the NexGen burner and allow the flame to stabilize.
Position the flame relative to the specimen and initiate exposure.
Monitor flame temperature and heat flux using thermocouples and sensors.
Observe whether flame penetrates the insulation material within the specified time.
Record data and evaluate performance in accordance with the applicable standard.
Send product request
Other supplier products
 |
STD-SESRU high precision surface roughness tester for textile quality control | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards This instrument supports the following international and national ... |
 |
Portable radiant protective performance tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Thermal protective clothing and some fire-retardant properties of the materia... |
 |
ISO 11155 Compliant Cabin Filter Test System | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Test System for both particle separation and gas absorption/desorption of of ... |
 |
Adiabatic Accelerated Calorimeter | Whats/App: +86 156 1874 6768 Web: standard-groups.com An Accelerating Rate Calorimeter (ARC) is a high-precision thermal analysis instrument that... |
 |
Laboratory Test Dummy for EV Battery Performance and Safety | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application This dummy is suitable for the following applications: Vibration reliability ... |
Same products
 |
Laser Cutting Machines | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Laser Cutting Machines PrecisionLaser Cutting Systemsfor Film, Glass & Industrial Materials ... |
 |
Precision Laser Micromachining Machine | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Precision Laser Micromachining Machine| Ultrafast Laser Micromachining Systems Chanxan provides ... |
 |
Ultrafast Laser Systems | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Ultrafast Laser Systems Femtosecond Laser System Ultra-precision femtosecond laser systemfor hi... |
 |
Industrial Laser Equipment Manufacturer | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Industrial Laser Equipment Manufacturer for Precision Cutting, Marking & Micromachining Chan... |
 |
Common Rail Injector Valve F00R J02 012 | Seller: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
