In-situ expansion analysis system

Get a quote：

Whats/App: +86 181 0160 0864

Web: gellowen.co.uk

The In-situ Expansion Analysis System is designed for high-precision measurement of dimensional and volumetric changes in electrochemical cells and related materials during charge/discharge, storage, and abuse testing. The system enables real-time, non-destructive monitoring of cell expansion behavior under controlled temperature, pressure, and environmental conditions. It is widely used in lithium-ion, solid-state battery R&D, safety evaluation, and reliability testing.

Application

(1) In-situ expansion and swelling analysis of lithium-ion pouch, prismatic, and coin cells during charge/discharge cycles.

(2) Dimensional change monitoring of solid-state batteries and solid electrolytes under electrochemical loading.

(3) Thermal expansion and contraction testing under wide temperature ranges for battery reliability studies.

(4) Pressure-coupled expansion analysis for pouch cell fatigue and mechanical stability evaluation.

(5) Correlation analysis between expansion, voltage, cycle life, and degradation mechanisms.

(6) Abuse and reliability testing including overcharge, fast charging, and thermal stress conditions.

Standards

(1) ASTM E83 – Standard Test Method for Verification of Linear Displacement Measuring Systems.

(2) ISO 12417-1 – Mechanical Testing of Metals – Dilation Test.

(3) IEC 62660-2 – Secondary lithium-ion cells for propulsion of electric road vehicles – Reliability and abuse testing.

(4) DIN 51221 – Testing of adhesives – Determination of tensile shear strength (dimensional deformation reference).

(5) CE Certification – Conformité Européenne.

Features

(1) Sub-micron displacement resolution down to 0.01 μm for precise expansion measurement.

(2) Non-contact laser displacement sensors eliminate mechanical interference and measurement hysteresis.

(3) Multi-environment testing with integrated temperature chamber covering –40°C to 200°C.

(4) Dynamic pressure loading up to 50 bar for pouch cell fatigue and mechanical stress testing.

(5) Real-time 3D deformation imaging with structured light scanning technology.

(6) AI-assisted deformation analysis for quantification of anisotropic and localized swelling.

(7) Multi-channel architecture supporting up to 8 cells tested simultaneously.

(8) Automatic test sequencing with preloaded protocols for common battery test scenarios.

(9) Open data interface for synchronization with EIS, gas analysis, and thermal imaging systems.

Parameters

Parameter	Specification
Displacement Range	±500 μm (linear), ±1° (angular)
Measurement Accuracy	±0.1 μm (linear), ±0.01° (angular)
Resolution	0.01 μm
Temperature Range	–40°C to 200°C
Temperature Ramp Rate	Up to 1°C/min
Pressure Range	0–50 bar (dynamic loading)
Channel Capacity	Up to 8 channels
Data Acquisition Rate	10,000 points/s per channel
Power Supply	100–240 V AC, 50/60 Hz
Dimensions (W×D×H)	800 × 600 × 1200 mm
Weight	220 kg (net) / 280 kg (gross)

Other supplier products

	Fully Automatic Dual-Plate Thermal Conductivity Tester (Guarded Hot Plate Method)	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Fully Automatic Dual-Plate Thermal Conductivity Tester (Guarded Hot Plate Method) ...
	Micro-Scale Abrasion Tester	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Micro-Scale Abrasion Tester is a laboratory instrument used to evaluate abrasi...
	Adhesion Tester | Precision Adhesion Tester	The adhesion tester is a device specifically used to detect the strength of the adhesion of materials. The following is a detailed description of i...
	In-situ expansion analysis system	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The In-situ Expansion Analysis System is designed for high-precision measurement o...
	Geomembrane thickness tester丨Geomembrane thickness machine	Scope of Application: Used to determine the thickness of smooth geomembrane and other plastic films under specified pressure and time. The sample ...

All supplier products

Same products

	MMA-120 Handheld Arc Welder	Seller: 871183	The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con...
	SHX Series Circulating Fluidized Bed Steam Boiler	Seller: Hebei Genjux Boiler Co.,Ltd	Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi...
	YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler	Seller: Hebei Genjux Boiler Co.,Ltd	Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ...
	DHL Series Coal-Fired Steam Boilers	Seller: Hebei Genjux Boiler Co.,Ltd	Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b...
	SZL Series Biomass Steam Boiler	Seller: Hebei Genjux Boiler Co.,Ltd	Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi...