In-situ expansion analysis system
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The In-situ Expansion Analysis System is designed for high-precision measurement of dimensional and volumetric changes in electrochemical cells and related materials during charge/discharge, storage, and abuse testing. The system enables real-time, non-destructive monitoring of cell expansion behavior under controlled temperature, pressure, and environmental conditions. It is widely used in lithium-ion, solid-state battery R&D, safety evaluation, and reliability testing.
Application
(1) In-situ expansion and swelling analysis of lithium-ion pouch, prismatic, and coin cells during charge/discharge cycles.
(2) Dimensional change monitoring of solid-state batteries and solid electrolytes under electrochemical loading.
(3) Thermal expansion and contraction testing under wide temperature ranges for battery reliability studies.
(4) Pressure-coupled expansion analysis for pouch cell fatigue and mechanical stability evaluation.
(5) Correlation analysis between expansion, voltage, cycle life, and degradation mechanisms.
(6) Abuse and reliability testing including overcharge, fast charging, and thermal stress conditions.
Standards
(1) ASTM E83 – Standard Test Method for Verification of Linear Displacement Measuring Systems.
(2) ISO 12417-1 – Mechanical Testing of Metals – Dilation Test.
(3) IEC 62660-2 – Secondary lithium-ion cells for propulsion of electric road vehicles – Reliability and abuse testing.
(4) DIN 51221 – Testing of adhesives – Determination of tensile shear strength (dimensional deformation reference).
(5) CE Certification – Conformité Européenne.
Features
(1) Sub-micron displacement resolution down to 0.01 μm for precise expansion measurement.
(2) Non-contact laser displacement sensors eliminate mechanical interference and measurement hysteresis.
(3) Multi-environment testing with integrated temperature chamber covering –40°C to 200°C.
(4) Dynamic pressure loading up to 50 bar for pouch cell fatigue and mechanical stress testing.
(5) Real-time 3D deformation imaging with structured light scanning technology.
(6) AI-assisted deformation analysis for quantification of anisotropic and localized swelling.
(7) Multi-channel architecture supporting up to 8 cells tested simultaneously.
(8) Automatic test sequencing with preloaded protocols for common battery test scenarios.
(9) Open data interface for synchronization with EIS, gas analysis, and thermal imaging systems.
Parameters
| Parameter | Specification |
|---|---|
| Displacement Range | ±500 μm (linear), ±1° (angular) |
| Measurement Accuracy | ±0.1 μm (linear), ±0.01° (angular) |
| Resolution | 0.01 μm |
| Temperature Range | –40°C to 200°C |
| Temperature Ramp Rate | Up to 1°C/min |
| Pressure Range | 0–50 bar (dynamic loading) |
| Channel Capacity | Up to 8 channels |
| Data Acquisition Rate | 10,000 points/s per channel |
| Power Supply | 100–240 V AC, 50/60 Hz |
| Dimensions (W×D×H) | 800 × 600 × 1200 mm |
| Weight | 220 kg (net) / 280 kg (gross) |
在线联系供应商
Other supplier products
 |
Fully Automatic Falling Sand Abrasion Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Fully Automatic Falling Sand Abrasion Tester is designed to evaluate the wear ... |
 |
Intervertebral Fusion Cages Shear Fatigue Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Intervertebral Fusion Cages Shear Fatigue Tester is a specialized biomechanica... |
|
|
In-situ expansion analysis system | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The In-situ Expansion Analysis System is designed for high-precision measurement o... |
 |
Automatic Long Filament Curl Shrinkage Tester | Get a quote: Whats/App: +86 181 0160 0864 The Automatic Long Filament Curl Shrinkage Tester is designed to measure boiling water shrinkage rate, ... |
 |
Gas Oxidizing Properties Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Gas Oxidizing Properties Tester is a device used to assess the oxidizing chara... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
