In-situ Battery Gas Monitoring Equipment Supplier
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
E-mail：info@standard-groups。com
Parameters
| Item | Specification |
|---|---|
| Platform Dimensions | Determined by sample volume requirements |
| Control Cabinet | 650(L) × 675(W) × 1750(H) mm |
| Fourier Transform Infrared (FTIR) System | 650(W) × 675(D) × 1750(H) mm |
| Power Supply | AC 220 V, 30 A |
| Weight | Approximately 900 kg |
| Backup Gas Source | Nitrogen ≥ 99.99% |
Test Procedures
Sample Installation: Place battery cells into the pressure vessel and secure the chamber.
System Setup: Connect nitrogen supply and configure oxygen concentration requirements.
Parameter Configuration: Set monitoring channels for voltage, temperature, pressure, and gas analysis in the control software.
Initiate Thermal Runaway: Trigger the battery using heating, overcharge, or nail penetration methods.
Data Acquisition: Real-time monitoring of gas composition, internal pressure, temperature, and battery parameters. Automated calculation of gas evolution rate and total gas volume.
Observation and Recording: Monitor test via video feed and software interface.
Test Completion: Safely vent the vessel, retrieve battery cells, and store collected data for analysis and reporting.
Maintenance Information
Inspect vessel seals, flanges, and sampling connections regularly for integrity.
Calibrate temperature, pressure, and gas sensors periodically.
Clean sampling lines and FTIR components to prevent contamination and measurement errors.
Verify nitrogen supply, vacuum pump operation, and safety valve function before each test.
Backup all acquired test data and system logs for traceability and reporting purposes.
Send product request
Other supplier products
 |
DSC Differential Scanning Calorimeter | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Differential Scanning Calorimeter (DSC) measures heat flow to/from a sample (1-10 mg) i... |
 |
ISO 20653 Automotive Wire Harness Dust & Sand Test Equipment Supplier Factory Direct | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Technical Parameters: Model No. STD-A STD-B STD-C Inner chambe... |
 |
4000 Hours Test Kit For Xenon light WeatherOmeeter | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction 4 thousand hours xenon lamp tester spare package, allows your device has a lon... |
 |
Heat Storage Performance Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Heat Storage Performance Tester provides standardized procedures and controls radiation hea... |
 |
Face Mask Tensile Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Face Mask Tensile Tester is designed to measure tensile strength, elongation at break, ... |
