ISO/DIS 29461 Turbine Filter Test System
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Applications
Testing of gas turbine intake filter systems according to ISO 29461-2 and ISO/AWI 29461-4
Testing of general air filters (ISO 16890. EN 779. ASHRAE 52.2)
Standards
The system complies with:
(1) ISO 29461-1 – Air filter performance, test methods.
(2) ISO 29461-2 – Air filter performance, gas adsorption test.
(3) ISO/AWI 29461-4 – Air filter performance, salt removal efficiency.
(4) ISO 16890-2 – Air filter classification and testing for general air filters.
(5) ISO 16890-3 – Gravimetric efficiency determination.
(6) ISO 16890-4 – Fractional efficiency and dust holding capacity.
(7) ISO/DIS 29461-7 – Gas turbine filter testing guidance.
(8) ISO 12103-1 – Fine test dust (A2) for filter performance.
(9) ASHRAE 52.2 – Air filter testing using airflow and particle size distribution.
(10) EN 779 – Requirements for high-efficiency air filters.
(11) GB/T 12103-1 & GB/T 12103-2 – Test dust and adsorption methods.
(12) GB/T 18801-2015 – Performance testing for air purifiers.
Principle
A defined volume flow rate is sucked through a HEPA intake filter, the attached test duct and the safety filter. The test system is composed of 6 sections: aerosol inlet, upstream measurement, specimen holder, downstream measurement, safety filter and flow rate measurement. The measurement sections are equipped with ports for the aerosol characterization and the determination of the pressure drop.
Technical data
| Parameter | Unit | Value |
|---|---|---|
| Test flow rate | m³/h | 800 … 11.000 |
| Test aerosol | – | DEHS, KCl, Ashrae, ISO 12103-A2 (AC fine), ISO 12103-A4 (AC coarse) |
| Test specimen dimensions | – | 610 × 610 mm (pocket and cassette filters); diameter ≤ 400 mm, length ≤ 1500 mm (filter cartridges) |
| Differential pressure of test specimen | Pa | max. 2000 |
| Compressed air supply (operating gas/air) | bar | min. 5 (17 m³/h) |
| Water supply (operating medium) | bar | min. 3 |
| Power supply | – | 3 × 400 VAC, 125 A, 50 Hz |
| Air circulation | % | 0 … 100 |
| Sensors (others) | – | Temperature, relative humidity, air pressure |
| System dimensions (W × H × D) | m | 4.6 × 1.7 × 14.0 |
Accessories
| Accessory / Consumable | Quantity | Description |
|---|---|---|
| DEHS Aerosol Generator | 1 | For fine aerosol particle testing |
| ASHRAE Dust Generator | 1 | For standardized dust loading tests |
| Optical Particle Counters | 2 | 0.2–10 μm, four channels |
| H14 Air Filter | 1 | For system calibration |
| Temperature & Humidity Sensors | 2 | Monitor test environment |
| Gas Analyzers | 3 | Measure NO₂, H₂SO₄, and other gases |
Send product request
Other supplier products
 |
Filter Media Tester G508（Without Vertical Duct)， ISO 11057 air filter media efficiency tester | The Filter Media Filtration Performance Test Bench G508 is designed to evaluate the filtration performance and durability of filter media and filte... |
 |
Pipe Coating Scratch Resistance Tester (for Pipe coating scratch tester) | Product Introduction: Paint and varnish scratch resistance tester, also known as scratch resistance tester or balanced scratch rod adhesion resist... |
 |
Guarded Heat Flow Meter | The Guarded Heat Flow Meter is a precision instrument designed to measure the thermal resistance and thermal conductivity of solids, including meta... |
 |
Appliance Stability Tester | Product Introduction The device conforms to GB4706-1 Article 20.1. IEC60335-1 Article 20.1 and other standards. The device is composed of a workbe... |
 |
Temperature and Low Air Pressure Test Chamber | Features and Benefits 1.The test chamber combines a wide temperature and humidity range, low pressure range, can complete a variety of complex low... |
Same products
 |
ASTM F2100 mask tester | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application G506 Automatic Filter Perfor... |
 |
Membrane Filter Integrity Testing Equipment | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application (1) Hydrophobic filter integ... |
 |
Fuel Water Separation Efficiency Test Rig | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The Fuel Water Separator Te... |
 |
DIN 51524 Purification Equipment for Hydraulic Oil | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application You can apply this tester in... |
 |
ASTM D6304 oil moisture tester | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application You can apply this unit in t... |
