.

ISO/DIS 29461 Turbine Filter Test System

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Applications

Testing of gas turbine intake filter systems according to ISO 29461-2 and ISO/AWI 29461-4

Testing of general air filters (ISO 16890. EN 779. ASHRAE 52.2)

Standards

The system complies with:

(1) ISO 29461-1 – Air filter performance, test methods.

(2) ISO 29461-2 – Air filter performance, gas adsorption test.

(3) ISO/AWI 29461-4 – Air filter performance, salt removal efficiency.

(4) ISO 16890-2 – Air filter classification and testing for general air filters.

(5) ISO 16890-3 – Gravimetric efficiency determination.

(6) ISO 16890-4 – Fractional efficiency and dust holding capacity.

(7) ISO/DIS 29461-7 – Gas turbine filter testing guidance.

(8) ISO 12103-1 – Fine test dust (A2) for filter performance.

(9) ASHRAE 52.2 – Air filter testing using airflow and particle size distribution.

(10) EN 779 – Requirements for high-efficiency air filters.

(11) GB/T 12103-1 & GB/T 12103-2 – Test dust and adsorption methods.

(12) GB/T 18801-2015 – Performance testing for air purifiers.

Principle

A defined volume flow rate is sucked through a HEPA intake filter, the attached test duct and the safety filter. The test system is composed of 6 sections: aerosol inlet, upstream measurement, specimen holder, downstream measurement, safety filter and flow rate measurement. The measurement sections are equipped with ports for the aerosol characterization and the determination of the pressure drop.

Technical data

ParameterUnitValue
Test flow rate m³/h 800 … 11.000
Test aerosol DEHS, KCl, Ashrae, ISO 12103-A2 (AC fine), ISO 12103-A4 (AC coarse)
Test specimen dimensions 610 × 610 mm (pocket and cassette filters); diameter ≤ 400 mm, length ≤ 1500 mm (filter cartridges)
Differential pressure of test specimen Pa max. 2000
Compressed air supply (operating gas/air) bar min. 5 (17 m³/h)
Water supply (operating medium) bar min. 3
Power supply 3 × 400 VAC, 125 A, 50 Hz
Air circulation % 0 … 100
Sensors (others) Temperature, relative humidity, air pressure
System dimensions (W × H × D) m 4.6 × 1.7 × 14.0

Accessories

Accessory / ConsumableQuantityDescription
DEHS Aerosol Generator 1 For fine aerosol particle testing
ASHRAE Dust Generator 1 For standardized dust loading tests
Optical Particle Counters 2 0.2–10 μm, four channels
H14 Air Filter 1 For system calibration
Temperature & Humidity Sensors 2 Monitor test environment
Gas Analyzers 3 Measure NO₂, H₂SO₄, and other gases

在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Helmet Strap Tensile Strength Measuring Instrument
Helmet Strap Tensile Strength Measuring Instrument Purpose Apply a certain initial load to the helmet strap system for a certain period of time. Then, let a weight of a certain mass fall from a cer...
Catheter Burst Pressure Tester
Catheter Burst Pressure Tester Main Uses The catheter burst pressure tester is a key device used to evaluate catheter performance in the medical field. Its main uses include: Ev...
Veslic Colorfastness Abrasion Tester ,Textile Colorfastness Testing Machine
Veslic Colorfastness Abrasion Tester ,Textile Colorfastness Testing Machine The Veslic Colorfastness Abrasion Tester is designed to evaluate colorfastness under rubbing (crocking) conditions for leather, finished textiles, ...
Plastic Biodegradation Testing System,ISO 16929 Biodegradable Plastic Testing Instruments
Plastic Biodegradation Testing System,ISO 16929 Biodegradable Plastic Testing Instruments The Plastic Biodegradation Testing System is a laboratory system used to evaluate the ultimate aerobic biodegradation performance and disintegratio...
Metal Corrosivity Tester
Metal Corrosivity Tester standards GB/T 15970 ISO 7539 ASTM G31 GB/T 10125 Scope of Application The metal corrosivity tester is designed and manufactured in line with...
供应产品

Same products

ASTM F2100 mask tester
ASTM F2100 mask tester 卖方: Standard International Group (HK) Limited Whats/App: +86 156 1874 6768 Web: standard-groups.com Application G506 Automatic Filter Perfor...
Membrane Filter Integrity Testing Equipment
Membrane Filter Integrity Testing Equipment 卖方: Standard International Group (HK) Limited Whats/App: +86 156 1874 6768 Web: standard-groups.com Application (1) Hydrophobic filter integ...
Fuel Water Separation Efficiency Test Rig
Fuel Water Separation Efficiency Test Rig 卖方: Standard International Group (HK) Limited Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The Fuel Water Separator Te...
DIN 51524 Purification Equipment for Hydraulic Oil
DIN 51524 Purification Equipment for Hydraulic Oil 卖方: Standard International Group (HK) Limited Whats/App: +86 156 1874 6768 Web: standard-groups.com Application You can apply this tester in...
ASTM D6304 oil moisture tester
ASTM D6304 oil moisture tester 卖方: Standard International Group (HK) Limited Whats/App: +86 156 1874 6768 Web: standard-groups.com Application You can apply this unit in t...