.

alfa laval gasketed Titanium palladium plate condenser supplier

Product introduction

The plate condenser consists of plates that are welded together in pairs to form a so-called plate set. The concept of a plate set leads to two different types of channels: a weld channel for condensing steam and a gasket seal channel for cooling water. This type of plate is specially designed for optimum condensation. It has an asymmetrical arrangement with a large gap on the steam side and a small gap on the cooling water side. This makes it possible to maintain a very low pressure drop at the steam end while maintaining a certain speed and turbulence on the cooling water side. This maximizes heat transfer efficiency and minimizes fouling.

Plate condensers are specially developed for condensing steam under low pressure or vacuum conditions in evaporation and distillation systems. It can meet a variety of specific applications and capabilities requirements. The steam inlet fitting is large and the two condensate outlets are small. The cooling water fitting is a medium size and is located in the center of the plate.

Maximum heat transfer area: 500m2/set; Maximum design pressure:16bar

Maximum temperature:200 celsius degree; Nozzle diameter:DN50~DN700

Plate thickness:0.5mm-1.2mm; Gasket material:NBR, EPDM, HNBR, HT-NBR, HEPDM, CR, VITON/FKM

Fixed and movable plate material: Carbon Steel, Stainless Steel, and others on request.

Plate material:AISI304, AISI316, AISI316L, Titanium, Ti-Pa,Hastelloy C276,254SMO,Nickel, AISI904L.

Features
Plate condenser

Lower cost

Due to the high heat transfer efficiency, this means less heat exchange area and higher cost efficiency than conventional shell and tube type, especially when stainless steel or titanium is required. The compact design also saves space, thus reducing transportation and installation costs.

Plate condenser

Less fouling

Due to the high strength turbulence created by the specially designed corrugated sheets, there is less fouling on the cooling water side than the shell and tube condenser.

Plate condenser

Easy to clean

The cooling water side is easy to clean, whether in the way of mechanical or chemical.

Plate condenser

Easy to expand

Just add an extra "plate group" in the existing frame.

Plate condenser

Complete counterflow

A greater degree of subcooling of non-condensable gases can be achieved compared to shell and tube equipment. Therefore, the load of the vacuum pump will be reduced.

Range of application

Alumina, food industry, sugar industry, beverage industry, industrial wastewater, etc.



Send product request

To: Qingdao Reapter Heat Exchange Equipment Manufacturing Co., Ltd.
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

high performance 254 smo liquid semi welded alfa laval plate evaporator
high performance 254 smo liquid semi welded alfa laval plate evaporator Product principle The working principle of the plate evaporator is to compress the secondary steam generated by the equipment through the configu...
plate and shell heat exchanger
plate and shell heat exchanger Product principle The plate and shell heat exchanger adopts a circular corrugated heat exchanger plate that welded into a heat exchanger lathed bun...
Plate heat exchanger gaskets
Plate heat exchanger gaskets ALFA LAVAL Plates And Gaskets Unique split-flow design, even flow rate, removes the dead zone of flow velocity, avoids corrosion cause...
 Alfa Laval plate and gasket M3 M6B M6M M10B M10M TL10B TL10P
Alfa Laval plate and gasket M3 M6B M6M M10B M10M TL10B TL10P As a Chinese plate heat exchanger manufacturer, we focus on plate heat exchanger, all kinds of plates and gaskets producing. Through 13 years devel...
GEA wide gap(free flow) plates for plate heat exchanger ss304 316L factory direct
GEA wide gap(free flow) plates for plate heat exchanger ss304 316L factory direct Product Feature 1. Rich in plate types, can meet any requirements of various media and working conditions. 2. Corrugated design patterns, to ensu...
All supplier products

Same products

Boxed Type Air-cooled Chiller
Boxed Type Air-cooled Chiller Seller: SCY chiller It is manufactured by modern advanced technology with excellent quality and beautiful appearance....
alfa laval gasketed Titanium palladium plate condenser supplier
alfa laval gasketed Titanium palladium plate condenser supplier Seller: Qingdao Reapter Heat Exchange Equipment Manufacturing Co., Ltd. Product introduction The plate condenser consists of plates that are welded together in pairs t...
high performance 254 smo liquid semi welded alfa laval plate evaporator
high performance 254 smo liquid semi welded alfa laval plate evaporator Seller: Qingdao Reapter Heat Exchange Equipment Manufacturing Co., Ltd. Product principle The working principle of the plate evaporator is to compress the secondary st...
ss 304 alfa laval sulfuric acid double wall plate heat exchanger manufacturer
ss 304 alfa laval sulfuric acid double wall plate heat exchanger manufacturer Seller: Qingdao Reapter Heat Exchange Equipment Manufacturing Co., Ltd. Product principle The double wall plate heat exchanger plate is welded integrally with two thin...
alfa laval Refrigerant Semi welded plate heat exchanger factory wholesale price
alfa laval Refrigerant Semi welded plate heat exchanger factory wholesale price Seller: Qingdao Reapter Heat Exchange Equipment Manufacturing Co., Ltd. Product introduction The semi welded plate heat exchanger is composed of a pair of plates, and...