Degassing Flux
Degassing Flux(SATA-PF-350)
General Description of Degassing Flux (SATA-PF-350)
Practice has proved that the hydrogen is the main cause of the pores in the aluminium alloy, the pores not only reduce the actual cross-sectional area of the casting, but also the source of the crack, so it is important part that removing the hydrogen during the smelting process.
SATA-degassing flux also name aluminum degassing fluxisa kind of traditional high efficiency degassing flux for aluminium and its alloys, it used for removing hydrogen and oxides from the aluminium melting.
Application of Degassing Flux (SATA-PF-350)
Plunge suitable quantity flux to the bottom (100mm from the bottom is better) of the melt, evenly and slowly remove the lunch, make the flux fully react with aluminium molten, stand or stir the molten for 10-15 min, the hydrogen and oxide will be taken out of aluminium molten.
Advantage of Degassing Flux (SATA-PF-350)
Easy operation, There are two options. One is with hexachloroethane in tablet form.and another is in powder form without hexachloroethane
It has excellent performance in refining, degassing and drossing
It can enhance the quality of casting, hydrogen content of aluminium molten can reduce to ≤0.1ml/100gAl, the oxide inclusion(Al2O3) can reduce 20% min, the casting inclusion defect reduce 50%min
Specification of Degassing Flux (SATA-PF-350)
White mixed powder
It is suit for all series alloy except high magnesium alloy,
Dosage: recommended dosage: 3%-5% large melting furnace, 4%-6% for crucible furnace
Working Temperature: 710℃-780℃
Package of Degassing Flux (SATA-PF-350)
Packed in 5kg (PE), 25kg (PP), 1000kg bags or customized.
Stored in dry, well-ventilated place, and avoid direct sunlight, keep sealed before using.
NOTE: This flux has serious hygroscopicity, please use immediately after opening.
Send product request
Other supplier products
 |
Drossing Flux | Drossing Flux (SATA-PF-310) Description of Drossing Flux (SATA-PF-310) SATA drossing fluxis specially developed for removing the slag from the alum... |
 |
Synthetic Cryolite (Na3ALF6) | General description of Synthetic Cryolite (Na3ALF6) Sandy, Powder, Granule Application of Synthetic Cryolite(Na3ALF6) Synthetic Cryolite (Sodi... |
 |
Drossing Flux | Drossing Flux(SATA-PF-310) Description of Drossing Flux (SATA-PF-310) SATA drossing flux is specially developed for removing the slag from the alum... |
 |
Magnesium Chloride Granule | General Introduction: Chemical formular: Mgcl2 6H2O Purity: 46.00%min. Appearance: pure white crystal power CAS NO.:7791-18-6 Chemically, is repr... |
 |
Granulated Fused Refining Fluxes | General Introduction: SATA granulated fused refining flux is a eutectic salt composed of mgcl2 anhydrous and potassium or sodium chloride. Which ca... |
Same products
 |
JTX Nano Conductive Silver Paste For Phone Screen Line Circuit Repair | Seller: Phonefix | JTX Nano Conductive Silver Paste repairs iPhone screen/green screen/white screen lines issues cau... |
 |
iFixes Solder Paste 138℃ 158℃ 183℃ 217℃ PCB BGA Chip Flux | Seller: Phonefix | iFixes solder paste is138 is158 is183 is217 conductive silver paste for mobile phone chip repair.... |
 |
Synthetic Cryolite | Seller: JINZHOU SATA FUSED FLUXES AND NEW MATERIALS FACTORY | Synthetic Cryolite General Description ofSynthetic Cryolite Sodium HexafluoroaluminateFormula: Na... |
 |
Sodium Fluosilicate/Hexafluorosilicate (SSF) | Seller: JINZHOU SATA FUSED FLUXES AND NEW MATERIALS FACTORY | Sodium Fluosilicate/Hexafluorosilicate (SSF) General Description of Sodium Fluosilicate/Hexafluor... |
 |
Raw Materials | Seller: JINZHOU SATA FUSED FLUXES AND NEW MATERIALS FACTORY | Metallurgical flux coating materialrefers to the material which can separate metal from mineral b... |
