Powder Refining Flux

• 

Powder Refining Flux (SATA-PF-330)

General Description of Powder Refining Flux (SATA-PF-330)

For aluminium alloys, since the Al has strong chemical activity, the inclusions and gases are easily generated during the smelting process, and they are distributed inside the alloy after solidification of the melt, which will reduce the alloy’s quality, It is necessary of removing the oxide inclusion, enhance the casting quality and avoid defects in the casting.

SATA-refining flux also name aluminium flux powder, which used for removing non-metallic inclusions from aluminium molten, it also will form a layer that efficiently prevents the aluminium molten from reacting with generating hydrogen pick-up and oxides from the air.

There are two options: One is general refining flux with emission. Another one is fewer fumes during working.

Application of Powder Refining Flux (SATA-PF-330)

The flux can be added by manually spreading or added by an injection equipment, when added it by an injection equipment, with the help of nitrogen or argon and flux, the oxide and hydrogen also can be removed , the injection time required is 15-20 minutes, after refining, impurities will float up to the surface.

Advantage of Powder Refining Flux (SATA-PF-330)

Less dosage, Eco-friendly and less fume

Low working temperature, it can fully react with aluminium molten

Easy operation, it can added by manually and injection equipment

Excellent performance in removing oxide inclusions and drossing from aluminium melt

There are sodium free recipe refining flux, suitable for high mg content aluminium alloy, avoid or reduce the white spots on the surface of aluminium and aluminium alloys, improve the product quality

Specification of Powder Refining Flux (SATA-PF-330)

White mixed powder

Dosage: Recommended dosage is 1-5kg per ton of aluminium molten weight, please contact the seller to get exact dosage according the aluminium products

Working temperature is 650℃ to 750℃

Package of Powder Refining Flux (SATA-PF-330)

Packed in 5kg (PE), 25kg (PP), 1000kg bags or customized.

Stored in dry, well-ventilated place, and avoid direct sunlight, keep sealed before using.

NOTE: This flux has serious hygroscopicity, please use immediately after opening

Other supplier products

	Recovery Flux	Recovery Flux (SATA-PF-320) General Description of Recovery Flux (SATA-PF-320) SATA Powder Fluxes for Recoveryis a kind of flux used flux for recov...
	Products	1# Flux General Description1# FLUX is a synthetic binary salts in forms of granule ,spherical and powder. Melting Point: 480℃Color: off-wh...
	AlF3	General Description: Molecular Formula: AlF3 CAS NO.:7784-18-1 Bulk Density: 1.51g/l Specific Gravity: 2.88g/cm3 Solubility: Soluble in water sligh...
	Drossing Flux	Drossing Flux(SATA-PF-310) Description of Drossing Flux (SATA-PF-310) SATA drossing flux is specially developed for removing the slag from the alum...
	Recovery Flux	Application: mainly used for primary aluminium ,aluminium alloy and secondary aluminium. It can be used for remove the floating dross on the surfac...

Same products

	Synthetic Cryolite	Seller: JINZHOU SATA FUSED FLUXES AND NEW MATERIALS FACTORY	Synthetic Cryolite General Description ofSynthetic Cryolite Sodium HexafluoroaluminateFormula: Na...
	Sodium Fluosilicate/Hexafluorosilicate (SSF)	Seller: JINZHOU SATA FUSED FLUXES AND NEW MATERIALS FACTORY	Sodium Fluosilicate/Hexafluorosilicate (SSF) General Description of Sodium Fluosilicate/Hexafluor...
	Raw Materials	Seller: JINZHOU SATA FUSED FLUXES AND NEW MATERIALS FACTORY	Metallurgical flux coating materialrefers to the material which can separate metal from mineral b...
	Mg Alloy Flux	Seller: JINZHOU SATA FUSED FLUXES AND NEW MATERIALS FACTORY	Magnesium alloyfluxhas a low melting point and small heat capacity. When heated in the air, it ge...
	Anhydrous Magnesium Chloride	Seller: JINZHOU SATA FUSED FLUXES AND NEW MATERIALS FACTORY	Magnesium Chloride Anhydrous (AMC) General Description of Magnesium Chloride Anhydrous (AMC) Name...