Morrison bronze bearings
The bearings are wrapped of a cold formable homogenous bronze (CuSn8), which will obtain exceptional material properties. The standard size are fitted with diamond shaped lubrication indents on the bearing surface. These indents serve as lubricant reservoirs to rapidly build up a lubrication film in the start movement and therewith reduce the start friction.
Other supplier products
|
Higher Load Bronze Bushing |
Machined Cast bronze bearings offer technically and economically favourable bearings solutions. High loading capability, low weight, good corrosion... |
|
Self-lubricating track |
Combined with the wear resistance of copper alloy and solid self-lubricating properties of the lubricant to use in the process of maintaining witho... |
|
MARGINAL-LUBRICATION BEARING |
1. POM 0.03-0.50mm, anti abrasion, low friction coefficient even no oil given. The inside of the bearing are full ofindentions, which need to be fi... |
|
Oilless Lubricating Bearing |
1. PTFE/Pb Composition, 0.01-0.003mm, anti-abrasion material, which will form a lubricating film during operation.
2. Bronze powder layer, 0.2-0.3... |
|
Thrust Washers |
Combined with the wear resistance of copper alloy and solid self-lubricating properties of the lubricant to use in the process of maintaining witho... |
All supplier products
Same products