Spherical roller bearing
Spherical roller bearings could bear much radial load besides some axical load.Its raceway6 is spherical.The bearing could still work normally,when the relative gradient is within 1-2.5 between the center lines of inner rings and outer rings due to the shaft was given force to crankle.
There are (cylindrical inner holes and tapered inner holes) two styles of inner rings. The taper is 1:12 or1:30 to this style of inner rings with tapered hole.
The outer ring is with lubrication grove and three equal oil holes for enhancing the good lubrication character,.
This type of bearings are applied to metallurgy ,milling, mine, petrol,paper,cement,sugar mill lines widely.
Send product request
Other supplier products
Deep groove ball bearing | The deep groove ball bearings have arc groove in both inner and outer raceway. They can accommodate axial loads in both directions and also combine... | |
Cylindrical roller bearing | High precision cylindrical roller bearing is part of WZFB super-precision series products. It belongs to line contact, while the bearing capacity a... | |
Tapered roller bearing | The tapered roller bearings have tapered rollers and they are guided by the inner ring rib. The vertexes of inner ring raceway, outer ring raceway ... | |
Angular contact ball bearing | Precision angular contact ball bearings have 719, 70 and 72 three diameter series, and the contact angle is 15 °(the suffix is C) and 25 ° ... | |
Angular contact ball bearing for ball screws | This bearing used to support the ball screw. The ball screw belongs to robot transmission mechanism, which requires high precision, high speed mach... |