Angular contact ball bearing

• 

Precision angular contact ball bearings have 719, 70 and 72 three diameter series, and the contact angle is 15 °(the suffix is C) and 25 ° (the suffix is AC). Bearing with big contact angle is used for the occasion which needs high axial rigidity and large axial load capacity.
High-speed, super high-speed bearing (such as: electric spindle bearing) have CETA (15 °) and ACETA (25 °) on suffix. These bearings have much more steel ball bearings, and have enough rigidity and carrying capacity.
Series 719 or 70 are applied in the occasion with small radial space and very high speed. And 72 series is suitable for medium and heavy load occasion. But we should choose 719series when it needs the highest rigidity. Because there are many steel ball bearings of 719 series, so they have high bearing rigidity. Due to the cross-sectional area of 719 series bearing is small, the diameter of the spindle rigidity can be increased, and the rigidity of spindle also increased, thus greatly improving the rigidity of machine. So the 719 series bearing are more widely used than the other two series in the spindle of machine tool.
WZFB can provide high precision angular contact ball bearing with P5、P4、P2 class.

Other supplier products

	Deep groove ball bearing	The deep groove ball bearings have arc groove in both inner and outer raceway. They can accommodate axial loads in both directions and also combine...
	Angular contact ball bearing for ball screws	This bearing used to support the ball screw. The ball screw belongs to robot transmission mechanism, which requires high precision, high speed mach...
	Cylindrical roller bearing	High precision cylindrical roller bearing is part of WZFB super-precision series products. It belongs to line contact, while the bearing capacity a...
	Spherical roller bearing	Spherical roller bearings could bear much radial load besides some axical load.Its raceway6 is spherical.The bearing could still work normally,when...
	Angular contact ball bearing	Precision angular contact ball bearings have 719, 70 and 72 three diameter series, and the contact angle is 15 °(the suffix is C) and 25 ° ...

Same products

	Class 300 Valve	Seller: GangYe Group Co.,Ltd.	Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing...
	Class 3000 Industrial Valve	Seller: GangYe Group Co.,Ltd.	Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-...
	Class 2500 Industrial Valve	Seller: GangYe Group Co.,Ltd.	Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ...
	Class 150 Valve	Seller: GangYe Group Co.,Ltd.	globe valve class 150is a pressure rating designation defined by standards organizations, such as...
	Class 1500 Industrial Valve	Seller: GangYe Group Co.,Ltd.	A class 1500 valve made of 316 stainless steel, for instance, can sustain 248 bar of pressure at ...