Mouse Mold
One computer mouse usually includes these plastic parts: a bottom shell, an upper cover, a middle cover, a wheel, a base of wheel, a frame which connects with electronic elements etc. These plastic parts are required not only to be textured well, but also to be wear-resistant. In addition, because it is an electronic housing, it needs to be assembled with electronic components, so the precision requirements for plastic products are relatively high. Green Vitality provide high quality mouse molds within a very short time. Our customers are satisfied with our professionalism and service.
Basic Information for Computer Mouse Mold
|
Description |
Computer Mouse Plastic Injection Mold |
|
Plastic material |
ABS |
|
Part dimension(mm) |
110*60*30mm |
|
Mould dimension(mm) |
280*380*250 |
|
Mould weight (KG) |
200KG |
|
Mould cavity&core steel |
718 |
|
Nos of Cavity |
4 |
|
Manufacture time (day) |
35days |
|
Mould life |
≥500000 |
|
Molding cycle (S) |
The 30s |
|
Mold Package |
Vacuum packing |
|
Pre-wood case |
Advantages of Project Management for Molding Electronic Products
Green Vitality Industry is a professional plastic mold and molding manufacturer which has 25years of experience in the plastic mold industry. We have below advantages which our customers benefit from us and we grow up as well thanks to our customers' trust and support.
Electronic Injection Molding Experts
Flexible OEM service is available, Steady Engineering team provides advice and solution to part moldability and error prevention for the overall project purpose.
Commitment to Quality
We believe in and practice the "Quality is of Prime Importance" philosophy. Well-versed manufacturing team to manage the mold machining and injection processing. QA department performs strong quality assurance in order that all products and services meet or exceed the expecting needs.
Competitive Price
With diversity in equipment capabilities and in-depth knowledge about industrial injection mold, Green Vitality is able to offer Competitive Prices for all products and services reasonably.
In-time Delivery
The professional team creates and executes the most efficient schedule for the respective project task, and helps arrange delivery at the economical possible cost.
Process of Injection Mouse Molding
Before making a production mold, we usually verify the plastic product & mold in the following steps. In this way, we can speed up product development, effectively control mold costs, reduce mold repair costs in the manufacturing stage, and fully verify product performance as much as possible to save time and cost.
The first stage: prototype sample
The prototype part is not only visible, but also can be assembled, it can intuitively reflect whether the structure is reasonable or not, and the difficulty of installation. It is convenient to detect and solve problems in the early stage. Usually made by rapid prototyping parts, CNC processed rapid prototypes, and 3D printing within 1 week.
The second stage: soft tooling
After the prototype parts verification, we will improve the problems found, and then carry out a small batch assembly test. In addition, in order to carry out more sufficient verification and avoid the risk of mold scrap, usually at this stage, we will first develop a lower cost soft mold to verify the mold structure and mold feasibility, and the material and structure of the parts are the same to mass-produced parts. Soft molds can typically produce no more than 10,000 shots.
The third stage: production tooling
After the parts have been fully verified and approved, the official steel mold is developed. The official steel mold can produce 200000, 500000, or 1000000 parts according to different steel materials used, and select the appropriate steel material according to the planned output.
Green Vitality Industry is a professional plastic mould supplierin various industries since 1993. We provide computer mouse mold, mice moulds, mold mouse, injection molds for sale, injection molded partsand etc. Want to know more, contact us.
Send product request
Other supplier products
 |
Auto Rear View Mirror Housing Mold | Auto Rear View Mirror HousingMold The car rearview mirror is an important part of car exterior parts, located on both sides of the car, is one o... |
 |
Filter and Flow Limiting Apparatus | The family mold is used to produce injection parts for liquid filtration and flow monitoring and control systems. These accessories are custom... |
 |
Plastic Enclosure Mold For Electronic Device | In a Lego game, you will hold the laser, sit on the device, and shoot various targets. Since this game is mainly to meet the gaming experience of L... |
 |
Car Seat Mould for Kids | Child safety seats are seats specially designed to protect children from injury or death in a collision. The main structure of the child safety sea... |
 |
Plastic Spoon Mould | Plastic spoon mainly used for eating, so it need to be heat resistant and non-toxic,and could meet the requirements of environmental protectionso, ... |
Same products
 |
Front Bumper Lower Lip Mould For 2021 Honda CRV | Seller: Taizhou Huangyan Chenpeng Mould Co., Ltd. | Introducing the for 2021 Honda CRV Front Bumper Lower Lip Mould: Elevate Your Driving Experienc... |
 |
Bottle cap mold | Seller: Taizhou Huangyan Yongsheng Mould Co., Ltd. | Taizhou Yongsheng Mould Co., Ltd. can produce cap moulds （）within 64 cavities. The hot runner or ... |
 |
Plastic Injection Mould For 2009 Audi A5 Front Bumper | Seller: Taizhou Huangyan Chenpeng Mould Co., Ltd. | Our Advantage:1.We have developed about 1000 PCS bumper mould since we founded.2.Our company's mo... |
 |
Double Color Mold For Car Head Lighting Two-Shot Mold | Seller: Taizhou Toolsong Mould Co., Ltd. | Double Color Mold For Car Head Lighting Two-Shot Mold Double color lens mold for car head lighti... |
 |
Front Lamp Lens Injection headlight mold | Seller: Taizhou Toolsong Mould Co., Ltd. | Front Lamp Lens Injection headlight mold The headlamp lens has a high standard in its aesthetics... |
