API610 BB4 multistage high pressure pump/BFP pump
API610 BB4 multistage high pressure pump/BFP pump
API 610 Standard Pump
Design:
All parts and components of the SBD series pumps are designed as interchangeable standard parts, which greatly helps to reduce the storage of spare parts.
Intermediate Casing
O-rings are designed between intermediate casings when connecting the sections with tie-bolts. Metal gaskets may also be used to replace the O-rings in case of necessity.
Suction and discharge casings are normally supported with feet construction. However, center supports are used for SBD150, as well as SBD80 and SBD100 when Temp. of pumped media exceeds 150℃.
Hydraulic Model and Balancing of Axial Force
Two different hydraulic models (Impellers and diffusers) are designed for each specification and model to expand the operating range with high efficiency. Replaceable wear rings are adopted for sealing between impeller and casing.
Most of the axial forces shall be balanced by hydraulic balancing device (drum) and the residual force shall be borne by thrust t bearings.
All SBD pumps are oil lubricated, except SBD25 which is lubricated with grease.
Performance Data:
Capacity: Up to 500m3/hr
Head: Up to 1200m
Operating Press.: Up to 15MPa
Operating Temp.: -80 ~ +180℃
Applications：
Water supply,Thermal power plant feed water pump/cooling water pump,Pipeling pressure boosting,Refrigeration project
Flanges
Discharge flanges and suction flanges of center supported pumps are designed as Vertical up, while suction flanges for foot supported pumps can be arranged in any direction.
Shaft Sealing
In general, balanced type Mechanical seals shall be used for shaft sealing. Soft packing is also applicable if necessary.
Shaft seal shall only bear as much as the suction pressure because discharge pressure shall be reduce after passing through the balancing drum.
Packing gland shall be cooled in case the temperature of flushing liquid is higher than 110℃. And the whole packing box shall be cooled if the temperature of flushing liquid is higher than 130℃
Driving End & Rotation
Driving end of the pump is designed at the suction side and CW rotation shall be viewed from the driving end.
Send product request
Other supplier products
 |
Vertical Long Shaft Pump | Vertical Long Shaft Pump Submersible Pump Application: This series pumps are used to transfer clear water, rain water, water in iron sheet pit... |
 |
TNH Heavy Duty Slurry Pump，Silicon nitride ceramics | TNH Heavy Duty Slurry Pump，Silicon nitride ceramics Overview TNH/TFN series pumps are horizontal cantilevercentrifugal pump. The material of TNH... |
 |
API610 OH1 foot mounting Cantilever single stage chemical/oil pump | API610 OH1 foot mounting Cantilever single stage chemical/oil pump API 610 Standard Pump API610 VS4 vertical single centrifugal pump Overview S... |
 |
API610 VS4 vertical single- or multi-stage centrifugal pump | API610 VS4 vertical single- or multi-stage centrifugal pump API 610 Standard Pump API610 VS4 vertical single centrifugal pump,API610 VS4 verti... |
 |
TDT Desulphurization Pump/FGD Pump | TDT Desulphurization Pump/FGD Pump Slurry Pump TDT Desulphurization Pump manufacturer,50B-L slurry pump TDT、TDTL(R)series FGD pump is single s... |
Same products
 |
WN(Q) Dredging Pump | Seller: Shijiazhuang Chongmu Fluid Machine Co., Ltd | The dredging pumpis a kind of mud pump developed by our company, which is used for dredging and h... |
 |
IH Stainless Steel Centrifugal Pump | Seller: Shijiazhuang Chongmu Fluid Machine Co., Ltd | The IH type single-stage single-suction cantilever chemical centrifugal pump is an energy-saving ... |
 |
Horizontal Multistage Pump | Seller: Shijiazhuang Chongmu Fluid Machine Co., Ltd | Looking for a reliable horizontal multistage pump manufacturerwith high-quality, durable, and exp... |
 |
Diaphragm Pump DP03BL Series | Seller: PJM MECHANICAL CO.LTD | Diaphragm Pump DP03BL Series We specifically manufacture DP03BL diaphragm pump for use in medica... |
 |
Gr300 Pneumatic Conveying Equipment/Air Vacuum Powder Automatic Conveying Equipment | Seller: Greentech International (Zhangqiu) Co., Ltd | Cast Iron Blow Through Airlock Valve Positive Rotary FeederRotary airlocks displace bulk solids f... |
