API610 BB4 multistage high pressure pump/BFP pump
API610 BB4 multistage high pressure pump/BFP pump
API 610 Standard Pump
Design:
All parts and components of the SBD series pumps are designed as interchangeable standard parts, which greatly helps to reduce the storage of spare parts.
Intermediate Casing
O-rings are designed between intermediate casings when connecting the sections with tie-bolts. Metal gaskets may also be used to replace the O-rings in case of necessity.
Suction and discharge casings are normally supported with feet construction. However, center supports are used for SBD150, as well as SBD80 and SBD100 when Temp. of pumped media exceeds 150℃.
Hydraulic Model and Balancing of Axial Force
Two different hydraulic models (Impellers and diffusers) are designed for each specification and model to expand the operating range with high efficiency. Replaceable wear rings are adopted for sealing between impeller and casing.
Most of the axial forces shall be balanced by hydraulic balancing device (drum) and the residual force shall be borne by thrust t bearings.
All SBD pumps are oil lubricated, except SBD25 which is lubricated with grease.
Performance Data:
Capacity: Up to 500m3/hr
Head: Up to 1200m
Operating Press.: Up to 15MPa
Operating Temp.: -80 ~ +180℃
Applications:
Water supply,Thermal power plant feed water pump/cooling water pump,Pipeling pressure boosting,Refrigeration project
Flanges
Discharge flanges and suction flanges of center supported pumps are designed as Vertical up, while suction flanges for foot supported pumps can be arranged in any direction.
Shaft Sealing
In general, balanced type Mechanical seals shall be used for shaft sealing. Soft packing is also applicable if necessary.
Shaft seal shall only bear as much as the suction pressure because discharge pressure shall be reduce after passing through the balancing drum.
Packing gland shall be cooled in case the temperature of flushing liquid is higher than 110℃. And the whole packing box shall be cooled if the temperature of flushing liquid is higher than 130℃
Driving End & Rotation
Driving end of the pump is designed at the suction side and CW rotation shall be viewed from the driving end.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
API610 BB1 single-stage double suction split case centrifugal pump | API610 BB1 single-stage double suction split case centrifugal pump API 610 Standard Pump single-stage centrifugal pump SBM Series pumps, are... | |
Spare Parts | Spare Parts Spare Parts and Related Equipments We are manufacturer of slurry pump and pump parts in China. Not only wet partssuch as impeller, v... | |
API610 VS4 vertical single- or multi-stage centrifugal pump | API610 VS4 vertical single- or multi-stage centrifugal pump API 610 Standard Pump API610 VS4 vertical single centrifugal pump,API610 VS4 verti... | |
ZLB Vertical Axial Flow Pump | ZLB Vertical Axial Flow Pump Submersible Pump Large Flow Submersible Pump,SubmersibleWaterPump,Vertical Axial Flow Pump Features: The trans... | |
ISO5199/ASME standard WPP long coupled chemical pumps | ISO5199/ASME standard WPP long coupled chemical pumps ISO 5199 &ASME B 73 Pump chemical pump Petrochemical process pump Chemical process pu... |
Похожие товары
Погружный двигатель и насос | Продавец: Tianjin Best Faith International Trade Co., Ltd. | QN/QM 6 "8" 10 "12" подводный двигатель Погружный двигатель Ritz 1215/2-1218/2-1222/2 Погружный... | |
China offer Plunger pump A10VS0-100DR-31R-PPA12N0 for Electric Company | Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China offer Plunger pump A10VS0-100DR-31R-PPA12N0 for Electric CompanySelection of advanced tech... | |
40PV-TSP(R) Vertical Slurry Pump | Продавец: Shijiazhuang Ruite Pump Co., Ltd | 40PV-TSP(R) Vertical Slurry Pump Product Description 40PV-TSP(R) Slurry Pump is ideal for a var... | |
12/10ST-TAHR Slurry Pump | Продавец: Shijiazhuang Ruite Pump Co., Ltd | 12/10ST-TAHR Slurry Pump Product Description The feature frame and cover plates made out of gre... | |
China made Guide pin 0069/0070 for power station | Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China made Guide pin 0069/0070 for power stationThe company has a large flow, high discharge pre... |